Hyperkin Alphastar Adapter for Nintendo Switch: User Manual

Uvod

The Hyperkin Alphastar Adapter is designed to enhance your gaming experience by allowing you to use your existing Xbox One (Model 1708), PlayStation 4 (PS4), and PlayStation 5 (PS5) wireless controllers with your Nintendo Switch console. This adapter provides a convenient and portable solution for cross-platform controller compatibility.

Product Overview

The Alphastar Adapter is a compact USB device that facilitates wireless communication between compatible controllers and your Nintendo Switch. Its sleek design ensures it can be easily integrated into your gaming setup.

Image: The Hyperkin Alphastar Adapter shown alongside its retail packaging.

Slika: Krupni plan view of the Hyperkin Alphastar Adapter, highlighting its compact form factor.

Uputstva za postavljanje

Follow these steps to connect your wireless controller to your Nintendo Switch using the Alphastar Adapter:

1. Prepare your Nintendo Switch: Ensure your Nintendo Switch is powered on and docked. For optimal performance, ensure your Switch system software is up to date.
2. Umetnite adapter: Plug the Hyperkin Alphastar Adapter into any available USB port on your Nintendo Switch dock. The adapter can be inserted into either the front or rear USB ports.

Image: The Alphastar Adapter securely plugged into a rear USB port of the Nintendo Switch dock.
3. Enable Pro Controller Wired Communication (if applicable): Na vašem Nintendo Switch uređaju, idite na System Settings > Kontroleri i senzori > Profesionalni kontroler Žičana komunikacija and ensure this setting is set to On. While this adapter uses a wireless connection, this setting can sometimes affect general controller compatibility.
4. Pair your Controller:
   • For Xbox One (Model 1708) Controllers: Press and hold the small pairing button on the top edge of your Xbox One controller until the Xbox logo starts flashing rapidly.
   • For PS4/PS5 Controllers: Pritisnite i držite Dugme PS i Dugme Dijeli/Kreiraj simultaneously on your controller until the light bar begins to flash rapidly.
5. Initiate Pairing on Adapter: Press the small pairing button located on the side of the Hyperkin Alphastar Adapter. The LED indicator on the adapter will begin to flash, indicating it is searching for a controller.
6. Potvrdite vezu: Once the controller and adapter successfully pair, the LED on the adapter will become solid, and your controller's light will stop flashing (or display its normal connected state). Your controller is now ready for use with your Nintendo Switch.

Image: The Alphastar Adapter connected to a Switch dock, indicating compatibility with Xbox One, PS4, and PS5 controllers.

Uputstvo za upotrebu

Once your controller is successfully paired with the Hyperkin Alphastar Adapter, it will function as a Pro Controller on your Nintendo Switch. Button mappings will generally correspond to standard Nintendo Switch Pro Controller layouts. Refer to your game's control settings for specific button assignments.

To disconnect the controller, simply turn off the controller or unplug the Alphastar Adapter from the Switch dock. To reconnect, ensure the adapter is plugged in and turn on your paired controller; it should automatically reconnect.

Održavanje

To ensure the longevity and proper functioning of your Hyperkin Alphastar Adapter, please observe the following maintenance guidelines:

• Keep the adapter dry and away from liquids.
• Clean the adapter with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Adapter čuvajte na hladnom i suhom mjestu kada ga ne koristite.
• Izbjegavajte ispuštanje ili izlaganje adaptera jakim udarcima.

Rješavanje problema

If you encounter issues while using your Hyperkin Alphastar Adapter, please consult the following common problems and solutions:

• Kontroler se ne povezuje:
  • Ensure the Alphastar Adapter is firmly plugged into a functional USB port on your Nintendo Switch dock.
  • Verify that your controller is fully charged or has fresh batteries.
  • Confirm that your controller is in its specific pairing mode (refer to step 4 in Setup Instructions).
  • Press the pairing button on the Alphastar Adapter to initiate a new search.
  • Try unplugging and re-plugging the adapter, then repeat the pairing process.
  • Ensure the Nintendo Switch setting for "Pro Controller Wired Communication" is enabled (even for wireless adapters, this can sometimes resolve connectivity issues).
• Kašnjenje ulaza ili prekidi veze:
  • Ensure there are no significant obstructions between your controller and the adapter.
  • Minimize other wireless devices operating nearby that might cause interference.
  • Ensure the adapter is not placed in an enclosed space that could block its signal.
• Adapter Does Not Fit in Dock:
  • Some Nintendo Switch docks, particularly older models or third-party docks, may have limited space around the USB ports. If the adapter is too wide to fit alongside existing cables (like HDMI or power), consider using a short USB extension cable to provide more clearance.
• Controller Connects to PC but Not Switch:
  • The adapter is specifically designed for Nintendo Switch compatibility. If it functions on a PC but not the Switch, re-verify all setup steps, especially the Switch's "Pro Controller Wired Communication" setting.

Specifikacije

Informacije o garanciji

Specific warranty details for the Hyperkin Alphastar Adapter are not provided within this document. For information regarding warranty coverage, terms, and conditions, please refer to the official Hyperkin website or contact their customer support directly. Please retain your proof of purchase for any warranty claims.

Podrška

For further assistance, technical support, or inquiries about the Hyperkin Alphastar Adapter, please visit the official Hyperkin website or contact their customer service department. You can often find FAQs, troubleshooting guides, and contact information on their support pages.

Hyperkin Official Webstranica: www.hyperkin.com