One Control Crocodile Tail Loop Wing (OC10W) User Manual

1. Proizvod je gotovview

The One Control Crocodile Tail Loop Wing (OC10W) is an advanced programmable 10-channel loop switcher designed to optimize your guitar effects setup. It integrates user feedback and technical advancements to provide flexible signal routing, comprehensive MIDI control, and convenient remote programming via Bluetooth.

Slika 1: Prednja strana view of the One Control Crocodile Tail Loop Wing (OC10W), showing the display, footswitches, and input/output jacks.

2. Vodič za postavljanje

2.1. Priključak za napajanje

Connect a standard 9V DC power supply (not included) to the 9V DC input jack on the rear panel of the OC10W. Ensure the power supply meets the required specifications (9V, 150mA minimum).

2.2. Audio veze

1. Connect your guitar or instrument to the INPUT Jack.
2. Povežite OUT1 or OUT2 utikač za tvoj ampunos korisnika koji želi da ga sačuva.
3. For each effect pedal, connect the pedal's input to a POŠALJI jack (e.g., SEND1) and the pedal's output to the corresponding RETURN jack (e.g., RETURN1). The OC10W features seven serial mono loops (SEND1-7/RETURN1-7) and three parallel loops (SEND8-10/RETURN8-10).
4. The TUNER output can be connected to a dedicated tuner pedal. This output features a mute switch for silent tuning.

Slika 2: Pozadi view of the OC10W, illustrating the various input, output, send, and return jacks for audio connections.

2.3. MIDI veze

Use standard MIDI cables to connect the MIDI IN i MIDI OUT jacks to other MIDI-compatible devices for comprehensive control and synchronization.

2.4. Bluetooth Pairing (Winglink App)

The OC10W can be controlled and programmed remotely via the Winglink iOS app. Ensure Bluetooth is enabled on your iOS device and follow the app's instructions to pair with the OC10W. Look for the Winglink logo on the device.

Figure 3: Close-up of the Winglink logo, indicating Bluetooth connectivity for the iOS app.

3. Operacija

3.1. Načini rada

The OC10W supports two primary modes of operation:

• Programski način rada: Allows you to store and recall complex effect pedal combinations and MIDI commands as presets. The OC10W offers 168 MIDI presets.
• Ručni način rada: Enables direct control over individual loops via the footswitches, allowing you to turn effects on and off instantly without recalling a preset.

3.2. Footswitch Functions

The OC10W features multiple footswitches for versatile control:

• PROGRAM / LOOP Footswitches (1-7): In Program Mode, these recall specific presets. In Manual Mode, they activate/deactivate the corresponding effect loops.
• BANK+ / LOOP8 Footswitch: Used to increment banks in Program Mode or control Loop 8 in Manual Mode.
• MUTE / LOOP9 Footswitch: Mutes the output for silent tuning or controls Loop 9.
• FS3 / MULTI JACK Footswitch: Controls external devices via the FS3 jack or acts as a multi-function switch.
• FS1, FS2, SLV: Additional footswitches for various control functions, often configurable.

Slika 4: Krupni plan view of the OC10W's footswitch section, including the main program/loop switches and control switches.

3.3. Prikaz i indikatori

The central display shows the current bank/index, program number, or custom name. LED indicators provide visual feedback on active loops, MIDI status, and other functions.

Figure 5: Close-up of the OC10W's digital display, showing a typical preset indication.

4. Održavanje

To ensure the longevity and optimal performance of your One Control Crocodile Tail Loop Wing, follow these maintenance guidelines:

• čišćenje: Use a soft, dry cloth to wipe down the unit. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish and internal components.
• Skladištenje: Uređaj čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti, ekstremnih temperatura i visoke vlažnosti.
• Veze: Periodically check all cable connections (audio, MIDI, power) to ensure they are secure and free from damage. Loose connections can lead to signal loss or intermittent operation.
• nožni prekidači: While designed for durability, avoid excessive force when operating the footswitches.

5. Otkrivanje problema

If you encounter issues with your OC10W, refer to the following common problems and solutions:

6. Tehničke specifikacije

7. Garancija i podrška

One Control products are manufactured to high standards. For warranty information, technical support, or service inquiries, please contact One Control customer service or visit their official webMolimo sačuvajte dokaz o kupovini za potrebe reklamacije.

Proizvođač: One Control