JUPLINK WiFi proširivač dometa - Korisnički priručnik

Product Overview

The JUPLINK WiFi Range Extender (Model EC3-750) is designed to expand your existing Wi-Fi network coverage, eliminating dead zones and providing reliable internet access throughout your home or office. This dual-band device supports both 2.4GHz and 5GHz frequencies, offering speeds up to 750Mbps. It features multiple working modes including Repeater, Access Point (AP), and Router mode, along with two Fast Ethernet ports for wired connections.

Slika 1: JUPLINK EC3-750 WiFi Range Extender with included interchangeable power plugs (US, UK, EU).

Sadržaj paketa

• JUPLINK EC3-750 WiFi Range Extender
• Interchangeable Power Plugs (US, UK, EU)
• Vodič za brzu instalaciju

Postavljanje i instalacija

1. Odabir lokacije

For optimal performance, place the extender halfway between your router and the Wi-Fi dead zone. Avoid placing it too close to the router or in areas with weak existing Wi-Fi signals.

Slika 2: Illustration of correct and incorrect placement for the WiFi extender to ensure optimal signal reception and extension.

2. Uključivanje

1. Select the appropriate power plug for your region and attach it to the extender.
2. Plug the extender into a power outlet. The Power LED will illuminate.

3. Načini konfiguracije

The EC3-750 supports three working modes: Repeater Mode, AP Mode, and Router Mode.

Slika 3: The three operational modes of the JUPLINK EC3-750: Router Mode, Repeater Mode, and AP Mode, showing their respective network configurations.

Repeater Mode (Extender)

This mode extends the coverage of an existing wireless network. It's ideal for eliminating Wi-Fi dead zones.

1. Connect your computer or mobile device to the extender's default Wi-Fi network (e.g., "JUPLINK_EXT").
2. Otvori a web browser and enter the default IP address (check the Quick Installation Guide for the exact address, typically 192.168.10.1 or similar).
3. Slijedite upute na ekranu da biste odabrali postojeću Wi-Fi mrežu i unesite njenu lozinku.
4. The extender will reboot and begin extending your network.

AP Mode (Access Point)

In AP mode, the extender connects to a wired network (e.g., from a modem or router) and broadcasts a new wireless network. This is useful for adding Wi-Fi capability to a wired-only network.

1. Connect an Ethernet cable from your modem/router to the WAN/LAN port on the extender.
2. Povežite računar ili mobilni uređaj na zadanu Wi-Fi mrežu proširivača signala.
3. Pristupite web interface and select AP Mode. Configure the new Wi-Fi network name (SSID) and password.

Način usmjerivača

In Router mode, the device acts as a primary router, connecting to a modem and creating a new wireless network for multiple devices.

1. Connect an Ethernet cable from your modem to the WAN/LAN port on the extender.
2. Pristupite web interface and select Router Mode. Configure your internet connection type (e.g., PPPoE, Dynamic IP, Static IP) and set up your new Wi-Fi network.

Upravljanje produžetkom

WPS dugme

The WPS (Wi-Fi Protected Setup) button provides a quick and easy way to connect to your existing router without manual configuration.

1. Plug in the extender near your main router.
2. Pritisnite WPS dugme na vašem glavnom ruteru.
3. Within two minutes, press the WPS button on the JUPLINK extender.
4. The extender will automatically connect to your router and extend its network.

Ethernet portovi

The extender is equipped with two Fast Ethernet ports (WAN/LAN and LAN) for wired connections. These ports allow you to connect devices like smart TVs, gaming consoles, or desktop computers directly to the extender for a stable wired connection.

Slika 4: The two Fast Ethernet ports (WAN/LAN and LAN) on the JUPLINK EC3-750, enabling high-speed wired connections for various devices.

Pametni indikator signala

The signal indicator LEDs on the extender provide visual feedback on the strength of the Wi-Fi signal received from your main router, helping you find the optimal placement.

• Green/Strong Signal: Excellent reception.
• Orange/Moderate Signal: Good reception, but consider adjusting placement.
• Red/Weak Signal: Poor reception, move the extender closer to the router.

Slika 5: Explanation of the Smart Signal Indicator, showing how different LED colors correspond to signal strength (Too Close, Good Reception, Weak Reception).

Održavanje

• Uređaj održavajte čistim i bez prašine. Za čišćenje koristite meku, suhu krpu.
• Osigurajte odgovarajuću ventilaciju oko uređaja kako biste spriječili pregrijavanje.
• Povremeno provjeravajte proizvođačeve webstranica za ažuriranja firmvera kako bi se osigurale optimalne performanse i sigurnost.
• Izbjegavajte izlaganje uređaja ekstremnim temperaturama, vlazi ili direktnoj sunčevoj svjetlosti.

Rješavanje problema

Nema napajanja / Uređaj se ne uključuje

• Provjerite je li produživač napajanja sigurno uključen u ispravnu utičnicu.
• Verify that the power outlet itself is functional by plugging in another device.

Cannot Connect to the Extender's Wi-Fi

• Make sure you are selecting the correct Wi-Fi network name (SSID) for the extender.
• Dvaput provjerite lozinku za Wi-Fi.
• Try restarting the extender by unplugging it and plugging it back in.

Extended Network Has No Internet Access

• Provjerite da li vaš glavni ruter ima aktivnu internetsku vezu.
• Verify that the extender is properly connected to your main router (check signal indicator).
• Reconfigure the extender in Repeater mode, ensuring you select the correct main Wi-Fi network and enter its password accurately.
• Pokušajte premjestiti produživač signala bliže glavnom ruteru.

Slow Speed on Extended Network

• Relocate the extender to a position that offers a stronger signal from your main router (refer to the Smart Signal Indicator).
• Minimizirajte smetnje od drugih elektronskih uređaja (npr. mikrovalnih pećnica, bežičnih telefona).
• Ensure your main router is providing adequate speed.

Resetiranje ekstendera

If issues persist, you may need to perform a factory reset. Locate the reset button (usually a small pinhole) on the extender. With the extender powered on, use a paperclip to press and hold the reset button for approximately 5-10 seconds until the LEDs flash. The extender will revert to factory default settings.

Specifikacije

Slika 6: The EC3-750 Dual Band Wi-Fi Extender's capabilities, illustrating 300Mbps on the 2.4GHz band and 433Mbps on the 5GHz band for seamless connectivity.

Garancija i podrška

For warranty information and technical support, please refer to the warranty card included in your product packaging or visit the official Juplink website. Sačuvajte račun o kupovini za reklamacije.

Proizvođač: Juplink

Datum prve dostupnosti: 19. oktobra 2020