HYPERLITE 4FT 40W parootporna LED lampa Uputstvo za upotrebu

1. Proizvod je gotovview

The HYPERLITE 4FT 40W Vapor Tight LED Light is a durable and efficient lighting fixture designed for challenging environments. It provides bright, cool white illumination and features a robust, sealed construction for protection against dust and water.

Ključne karakteristike:

Visoka svjetlina: 40W, 5200 lumens, 130 lumens per watt.
Izdržljiva konstrukcija: Polycarbonate material with stainless clips for a vapor-tight seal.
Zaštita životne sredine: IP65 certifikat za otpornost na prašinu i vodu.
Wide Voltage Raspon: Operates on 100-277V AC.
Dug životni vek: Rated for over 50,000 hours.
Certifikati: UL na listi za sigurnost i pouzdanost.

2. Sigurnosne informacije

Molimo vas da pročitate i razumjete sva sigurnosna uputstva prije instalacije i rada. Nepoštivanje ovih uputstava može dovesti do strujnog udara, požara ili drugih opasnosti.

Uvijek isključite napajanje na prekidaču prije instaliranja ili servisiranja uređaja.
Installation should be performed by a qualified electrician in accordance with national and local electrical codes.
Do not install in areas where the operating temperature exceeds the specified range (-22°F to 113°F).
Uvjerite se da su svi priključci sigurni i pravilno izolirani.
Ne modificirajte uređaj ni na koji način.

3. Instalacija

The HYPERLITE Vapor Tight LED Light is designed for easy surface mounting on ceilings or walls. Mounting hardware is included.

3.1. Sadržaj paketa

HYPERLITE 4FT 40W Vapor Tight LED Light Fixture
Montažni nosači
Vijci i ankeri
Žičane matice

Dimensions and included accessories for the HYPERLITE Vapor Tight LED Light — Image 2: Dimensions of the fixture (47.24"L x 3.54"W x 3.26"H) and a visual representation of the included mounting hardware.

3.2. Upute za montiranje

Pripremite prostor za instalaciju: Ensure the power is off at the circuit breaker. Select a suitable location for mounting on a ceiling or wall.
Označite rupe za montažu: Use the mounting brackets as a template to mark the desired locations for drilling holes.
Instalirajte nosače za montažu: Drill pilot holes and secure the mounting brackets to the surface using the provided screws and anchors.
Pričvrstite učvršćenje: Carefully snap the LED light fixture into place on the installed mounting brackets. Ensure it is securely seated.
Reinforce (Optional): For added security, use the nut reinforcement installation method if applicable to your mounting brackets.

Three-step quick installation guide for the HYPERLITE Vapor Tight LED Light — Image 3: Visual guide demonstrating the three steps for quick installation: marking holes, snapping the fixture, and securing with nuts.

3.3. Električno ožičenje

The fixture includes a terminal block for quick and secure wiring connections.

Connect the live (black) wire from your power source to the live terminal on the fixture.
Connect the neutral (white) wire from your power source to the neutral terminal on the fixture.
Connect the ground (green/bare copper) wire from your power source to the ground terminal on the fixture.
Ensure all connections are tight and properly insulated with wire nuts.

3.4. Daisy Chain Connection

Multiple HYPERLITE Vapor Tight LED Lights can be daisy-chained together using the integrated 2-foot wire for simplified wiring. The 40W model can connect up to 17 lamps.

Diagram showing multiple HYPERLITE LED lights connected in a daisy chain configuration — Image 4: Illustration of the daisy chain feature, allowing multiple fixtures to be linked from a single power source, reducing wiring complexity.

4. Operacija

Once installed and wired correctly, the HYPERLITE Vapor Tight LED Light operates by a standard electrical switch (push button type). Ensure the power supply is restored after installation.

4.1. Intended Use Environments

This fixture is suitable for both indoor and outdoor use in various demanding environments, including:

Garaže i radionice
Barns and Agricultural Buildings
Cold Storage and Walk-in Freezers (operating range -22°F to 113°F)
Outdoor Corridors and Porches
Warehouses and Industrial Facilities
Autopraonice

HYPERLITE LED light installed in a car wash environment — Image 5: The vapor tight LED light providing illumination in a car wash, demonstrating its suitability for wet environments.

5. Održavanje

The HYPERLITE Vapor Tight LED Light requires minimal maintenance due to its durable and sealed design.

5.1. Čišćenje

Uvjerite se da je napajanje isključeno prije čišćenja.
Obrišite vanjski dio uređaja mekom,amp tkanina.
Do not use abrasive cleaners or solvents, as these may damage the polycarbonate material.
The IP65 rating ensures protection against dust and water jets, making external cleaning straightforward.

Close-up of waterproof connectors on the HYPERLITE LED light — Image 6: Detail of the waterproof connectors, highlighting the strong sealing and ease of cleaning for wet locations.

5.2. Inspekcija

Periodically inspect the fixture for any signs of physical damage or loose connections.
Check the mounting brackets to ensure they remain secure.

6. Otkrivanje problema

If you encounter issues with your HYPERLITE Vapor Tight LED Light, refer to the following common troubleshooting steps:

Problem	Mogući uzrok	Rješenje
Svjetlo se ne pali	Nema napajanja Slabo ožičenje Neispravan prekidač	Check circuit breaker and power source Provjerite jesu li svi spojevi ožičenja sigurni Testirajte ili zamijenite prekidač
Svjetlo je slabo ili treperi	Netačan voltage Slaba veza Fixture damage	Osigurati voltage is within 100-277V range Provjerite priključke ožičenja U slučaju oštećenja obratite se korisničkoj podršci
Water or dust inside fixture	Nepravilna instalacija Damage to seal	Ensure all seals and clips are properly secured Inspect for cracks or damage; contact support

If these steps do not resolve the issue, please contact HYPERLITE customer support.

7. Specifikacije

Detailed technical specifications for the HYPERLITE 4FT 40W Vapor Tight LED Light.

Atribut	Specifikacija
Naziv modela	Vapor Tight Light
Broj modela stavke	LED-JJ-21W-TRI
Wattage	40 Watts
Osvetljenost	5200 lumena
Luminous Efficacy	130 lumena po vatu
Temperatura boje	5000K (hladno bijelo)
Voltage	100-277V AC
Dimenzije (D x Š x V)	47.24" x 3.54" x 3.26"
Težina artikla	4.74 funti
Materijal	Polikarbonat
IP Rating	IP65 (otporan na prašinu i vodu)
Radna temperatura	-22°F do 113°F (-30°C do 45°C)
Životni vijek	50,000+ sati
Certifikati	UL Listed
Vrsta montaže	Surface (Ceiling/Wall)
Uključene komponente	Montažni hardver

8. Garancija i podrška

HYPERLITE stoji iza kvalitete svojih proizvoda.

8.1. Informacije o garanciji

Ovaj proizvod dolazi sa a 36-mjesečna garancija od datuma kupovine. Ova garancija pokriva nedostatke u materijalu i izradi pri normalnoj upotrebi.

8.2. Politika povrata

A Period povrata od 30 dana is offered for this product.

8.3. Korisnička podrška

For any questions, technical assistance, or warranty claims, please contact HYPERLITE customer service. Our dedicated team is available to provide exceptional after-sales support.

Please refer to the HYPERLITE official webweb-mjesto ili vašu dokumentaciju o kupovini za kontakt podatke.

HYPERLITE LED-JJ-21W-TRI