KING K901-B Hoot WiFi linija Voltage Pametni programabilni termostat - uputstvo za upotrebu

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your KING K901-B Hoot WiFi Line Voltage Smart Programmable Thermostat. This device is designed to provide precise temperature control for electric heating systems, including baseboard, fan-forced, and radiant electric heaters, with the added convenience of WiFi connectivity for remote management.

Molimo vas da pažljivo pročitate ovaj priručnik prije instalacije i upotrebe kako biste osigurali pravilno funkcioniranje i sigurnost.

Sigurnosne informacije

• Instalaciju mora izvršiti kvalificirani električar u skladu s lokalnim i nacionalnim električnim propisima.
• Always turn off power at the circuit breaker before installing or servicing the thermostat.
• Ovaj termostat je dizajniran za linijski volumentage electric heating systems (120V/208V/240V, Single Pole, 3-Wire). Do not use with low voltage systems (e.g., furnaces, central air conditioners).
• Osigurajte da su svi spojevi ožičenja sigurni kako biste spriječili električne opasnosti.
• Ne izlažite termostat vodi ili prekomjernoj vlazi.

Sadržaj paketa

• KING K901-B Hoot WiFi Thermostat
• Montažni vijci
• Žičane matice
• Korisnički priručnik (ovaj dokument)

Instalacija

Potreban alat:

• Odvijač (Phillips i Flathead)
• Skidači žice
• Voltage Tester

Wiring Instructions (Single Pole, 3-Wire):

1. Isključite napajanje: Locate the circuit breaker controlling your heating system and turn it OFF. Verify power is off using a voltage tester.
2. Uklonite stari termostat: Carefully remove your existing thermostat from the wall. Disconnect the wires, noting their connections.
3. Identifikujte žice: For a single pole, 3-wire installation, you will typically have two line wires (L1, L2 from the power source) and one load wire (to the heater). Consult your existing thermostat's wiring or a qualified electrician if unsure.
4. Connect New Thermostat:
   • Connect the two line wires (L1, L2) from the power source to the thermostat's designated line terminals.
   • Connect the load wire to the thermostat's designated load terminal.
   • Osigurajte da su svi spojevi sigurni pomoću žičanih matica.
5. Montaža termostata: Secure the thermostat to the wall using the provided mounting screws.
6. Vrati snagu: Ponovo uključite napajanje na prekidaču.

Napomena: Incorrect wiring can damage the thermostat or heating system and pose a fire hazard. If you are not comfortable with electrical wiring, please consult a licensed electrician.

Image: The KING K901-B Hoot WiFi Thermostat display, showing the current temperature and set point, alongside the Hoot logo and icons for downloading the app from the App Store and Google Play.

Setup: Hoot Smart Phone App & WiFi Connection

The Hoot thermostat connects to your home WiFi network (2.4GHz only) to enable remote control and programming via the Hoot smartphone app.

1. Preuzmite aplikaciju: Traži "Hoot Smart Comfort Control" in the Apple App Store or Google Play Store and install it on your smartphone.
2. Kreirajte račun: Open the Hoot app and follow the on-screen instructions to create a new user account or log in if you already have one.
3. Dodaj uređaj: U aplikaciji odaberite opciju za dodavanje novog uređaja.
4. Thermostat Pairing Mode: On the thermostat, follow the instructions to put it into WiFi pairing mode. This usually involves holding a specific button or navigating through a menu. The thermostat display will indicate when it's ready to connect.
5. Povežite se na WiFi: In the Hoot app, select your 2.4GHz home WiFi network and enter the password. The app will guide you through the connection process.
6. Potvrda: Once connected, the thermostat display will show a WiFi icon, and the app will confirm successful pairing.

Važno: The Hoot thermostat only supports 2.4GHz WiFi networks. If you have a dual-band router, ensure your phone is connected to the 2.4GHz band during the setup process.

Uputstvo za upotrebu

Manual Operation (Touchscreen):

• Podešavanje temperature: Koristite gore (^) i dolje (v) arrows on the touchscreen to increase or decrease the set temperature.
• Uključivanje/isključivanje: Pritisnite dugme za napajanje (⏻) to turn the heating system on or off.
• Odabir načina rada: The thermostat may offer different modes (e.g., Heat, Off). Refer to the on-screen icons for selection.
• Zamjena rasporeda: Manually adjusting the temperature will temporarily override any active schedule. The override duration can often be set or will revert at the next scheduled event.

App Operation (Hoot Smart Comfort Control):

• Daljinska kontrola temperature: Adjust the temperature from anywhere using the Hoot app on your smartphone.
• Rasporedi programa:
  • Create custom heating schedules with up to 4 or 6 time periods per day for maximum flexibility.
  • Set different schedules for weekdays and weekends, or customize each day individually.
• Funkcija zadržavanja: Use the "Hold" feature to maintain a specific temperature indefinitely, overriding the schedule until manually released.
• Način odmora: Set a specific temperature for an extended period when you are away, saving energy.
• User Defined Max Temperature Lock: Set a maximum temperature limit to prevent overheating or unauthorized adjustments.

Održavanje

• čišćenje: Gently wipe the thermostat screen and body with a soft, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
• Ažuriranja firmvera: The thermostat supports Over-The-Air (OTA) firmware upgrades. The Hoot app will notify you if an update is available. Follow the app's instructions to ensure your thermostat has the latest features and improvements.
• Baterija (ako je primjenjivo): Ova linija voltage thermostat does not typically require batteries for operation, as it draws power directly from the heating circuit.

Rješavanje problema

• Termostat se ne uključuje:
  • Provjerite prekidač strujnog kruga i uvjerite se da je UKLJUČEN.
  • Provjerite jesu li svi spojevi ožičenja sigurni i ispravni.
• Bez izlazne toplote:
  • Provjerite je li termostat postavljen na temperaturu višu od trenutne temperature prostorije.
  • Check if the thermostat is in "Off" mode or "Vacation" mode.
  • Verify the heating system itself is functioning correctly.
• Problemi s WiFi vezom:
  • Potvrdite da vaš ruter emituje mrežu od 2.4 GHz.
  • Ensure your smartphone is connected to the 2.4GHz network during setup.
  • Move the thermostat closer to the WiFi router if possible, or consider a WiFi extender.
  • Restart your router and the thermostat (by cycling power at the breaker).
  • Re-attempt the WiFi pairing process through the Hoot app.
• Netačna očitavanja temperature:
  • Pazite da termostat nije izložen direktnoj sunčevoj svjetlosti, propuhu ili izvorima topline (npr.ampuređaji) koji bi mogli uticati na njegov senzor.
  • The thermostat uses an electronic thermistor for accurate control (±1°F).
• Ekran na dodir ne reaguje:
  • Try cycling power to the thermostat at the circuit breaker to reset it.

Specifikacije

Garancija i podrška

For warranty information and technical support, please refer to the official KING website or contact KING customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Proizvođač: King Electric

Webstranica: www.king-electric.com (Npramplink, stvarni link se može razlikovati)