HYPERLITE HYPERLITE Will Series

HYPERLITE 2 LED svjetiljke za visoke reflektore 220W - Korisnički priručnik

Model: HYPERLITE Will Series

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your HYPERLITE 2 Pack LED High Bay Lights. These 220W, 4FT linear LED lights are designed for high-efficiency illumination in environments such as warehouses, factories, and workshops. They feature 28,600 lumens of brightness, AC 120-277V input, and 1-10V dimmable functionality. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

Two HYPERLITE 220W LED High Bay Lights hanging from chains
Image 1.1: Two HYPERLITE 220W LED High Bay Lights. These linear fixtures are shown suspended by chains, illustrating their typical installation method in a commercial or industrial setting.

2. Sigurnosne informacije

Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste smanjili rizik od požara, strujnog udara ili ozljede:

  • Isključite napajanje prije instalacije, održavanja ili čišćenja.
  • Installation should be performed by a qualified electrician in accordance with national and local electrical codes.
  • Osigurajte dovod voltage is compatible with the fixture's requirements (AC 120-277V).
  • Do not operate the fixture with a damaged cord or if it has been dropped or damaged in any way.
  • Avoid direct eye exposure to the light source when the fixture is powered on.
  • Ne modificirajte uređaj niti ga koristite u druge svrhe osim za one za koje je namijenjen.

3. Sadržaj paketa

Provjerite da li su sve komponente prisutne u paketu:

  • 2 x 220W Linear High Bay Lights
  • Hanging Chain
  • V-Shaped Hook
  • Uputstvo za upotrebu (ovaj dokument)

4. Specifikacije

FeatureSpecifikacija
BrandHYPERLITE
Broj modelaHYPERLITE Will Series
Wattage220W
Osvetljenost28,600 lumena
Efikasnost130 lumena po vatu
VoltageAC 120-277V
Temperatura boje5000 Kelvina (dnevno svjetlo)
Zatamnjenje1-10V Dimable
MaterijalAluminijum
Dimenzije proizvoda47.2 cm D x 13.6 cm Š x 2.2 cm V
Težina artikla11 funti
Vrsta instalacijeSemi Flush Mount (Hanging)
CertifikatiUL/DLC Approved
Unutrašnja/vanjska upotrebaIndoor
Diagram showing key specifications of the HYPERLITE LED High Bay Light
Image 4.1: Key specifications of the HYPERLITE LED High Bay Light, including 28,600 lumens, 120° beam angle, 5000K color temperature, and UL & DLC certifications.
Close-up of the LED chips in the HYPERLITE High Bay Light
Slika 4.2: Krupni plan view of the 130LM/W bright chips used in the HYPERLITE linear high bay light, highlighting the unique anti-glare design.
Close-up of the aluminum housing and fin design for heat dissipation
Image 4.3: Detail of the selected aviation aluminum housing with a fin design, engineered to maximize heat dissipation and prolong the service life of the LED fixture.

5. Postavljanje i instalacija

The HYPERLITE linear high bay lights are designed for a 3-step easy installation using the provided V-shaped hook and strong chain. Ensure power is disconnected before beginning installation.

  1. Fix the Chain: Securely attach the hanging chain to a suitable structural support in your desired installation location. Ensure the support can safely bear the weight of the fixture.
  2. Attach V-Shaped Hook: Securely attach the V-shaped hook to the lamp body. The joint between the V-shaped hook and the lamp is manufactured to prevent breakage.
  3. Connect Chain to Hook: Connect the hanging chain to the V-shaped hook on the fixture. Use the integrated gradient (level indicator) to ensure a balanced installation.

Napomena: Embedded or pipe mounting accessories are not included and must be acquired separately if desired. Ensure all electrical connections are made by a qualified professional.

Close-up of the V-shaped hook and balance knob on the HYPERLITE High Bay Light
Image 5.1: Detail of the V-shaped hook and the 'Magic Balance' knob. This knob helps ensure the fixture is perfectly balanced during installation, indicated by the level bubble.
Collage of various installation environments for HYPERLITE High Bay Lights
Slika 5.2: Primjeramples of HYPERLITE High Bay Lights installed in different settings, including a large empty warehouse, a garage with a car lift, and a smaller workshop, demonstrating their versatility.

6. Uputstvo za upotrebu

The HYPERLITE LED High Bay Lights are designed for straightforward operation once installed.

6.1 Uključivanje/isključivanje napajanja

Once wired to a power source, the lights will turn on when power is supplied to the circuit. Use a standard wall switch or circuit breaker to control the power to the fixtures.

6.2 1-10V Dimming Function

These fixtures support 1-10V dimming. To utilize this feature, connect the fixture to a compatible 1-10V dimmer switch (not included). The dimmer allows you to adjust the light output to suit different lighting needs and preferences. Follow the dimmer manufacturer's instructions for wiring and operation.

6.3 Opcioni pribor

The lights are compatible with optional accessories such as emergency power units and motion sensors (not included). These accessories provide additional functionality:

  • Emergency Power Compatible: Ensures lighting during power outages.
  • Motion Sensor Compatible: Provides automatic switching based on motion, potentially saving energy.

Refer to the specific accessory's instruction manual for installation and operation details.

7. Održavanje

Regular maintenance ensures the longevity and optimal performance of your HYPERLITE LED High Bay Lights.

  • čišćenje: Isključite napajanje prije čišćenja. Koristite meku, suhu ili blago natopljenu krpu.amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
  • inspekcija: Periodically inspect the hanging chains, hooks, and electrical connections for any signs of wear, damage, or loosening. Address any issues promptly.
  • LED: The LED chips are designed for long life and do not require replacement under normal operating conditions.

8. Otkrivanje problema

If you encounter issues with your HYPERLITE LED High Bay Lights, refer to the following common troubleshooting steps:

ProblemMogući uzrokRješenje
Svjetlo se ne paliNema napajanja
Slabo ožičenje
Faulty switch/dimmer
Provjerite osigurač i izvor napajanja.
Provjerite jesu li svi spojevi ožičenja sigurni (uvjerite se da je napajanje isključeno).
Test the switch or dimmer for functionality.
Svjetlo neočekivano treperi ili se zatamniNekompatibilan dimer
Labavo ožičenje
Voltage fluktuacije
Ensure dimmer is 1-10V compatible.
Provjerite priključke ožičenja.
Za provjeru stabilnosti napajanja obratite se električaru.
Smanjena svjetlinaPreniska postavka dimera
Akumulacija prašine na uređaju
Podesite prigušivač na maksimalnu postavku.
Clean the fixture surface (ensure power is off).
Fixture is hot to the touchNormal operation (LEDs generate heat)
Loša ventilacija
Preopterećenje
Some heat is normal. Ensure adequate airflow around the fixture.
Verify fixture is not enclosed or obstructed. If excessively hot, disconnect power and consult an electrician.

If the problem persists after attempting these solutions, please contact HYPERLITE customer service.

9. Garancija i podrška

HYPERLITE stands behind the quality and reliability of its products.

9.1 Informacije o garanciji

Your HYPERLITE Linear High Bay Lights come with a 5 godine garancijeOva garancija pokriva nedostatke u materijalu i izradi pri normalnoj upotrebi. Molimo sačuvajte dokaz o kupovini za potrebe reklamacije.

9.2 Služba za korisnike

For technical assistance, warranty claims, or any other inquiries, please contact our dedicated customer service team. Our team is committed to providing exceptional after-sales service.

For more information or to contact support, please visit the official HYPERLITE store or website.

HYPERLITE Store: Visit HYPERLITE Store on Amazon

© 2025 HYPERLITE. Sva prava pridržana.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.