Marantec Comfort Kit SU11000 Pogon za klizna vrata - uputstvo za upotrebu

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Marantec Comfort Kit SU11000 Sliding Gate Drive. This robust system is designed for gates weighing up to 1100 kg, featuring a 24V motor and 868 MHz bi.linked technology for reliable performance. It includes an integrated control unit, two 2-channel transmitters, and a pair of electric photocells for enhanced safety and convenience.

The SU11000 drive unit is engineered with a high-performance gear reduction system, an extra-large bearing, and a very quiet mechanism, all protected by a stable, weather-resistant die-cast aluminum housing. Magnetic limit flags ensure precise end position adjustment.

Figure 1: Marantec Comfort Kit SU11000 Sliding Gate Drive and included accessories.

2. Sigurnosne informacije

Please read all safety warnings and instructions carefully before installing and operating the gate drive. Failure to follow these instructions may result in serious injury or property damage.

• Instalaciju mora izvršiti kvalificirano osoblje u skladu s lokalnim električnim i građevinskim propisima.
• Prije izvođenja bilo kakvih radova na instalaciji, održavanju ili popravci, provjerite je li napajanje isključeno.
• Keep hands, feet, and clothing clear of the gate and drive mechanism during operation.
• Ne dozvolite djeci da se igraju s komandama za otvaranje kapije ili da ih koriste.
• Regularly inspect the gate and drive system for signs of wear, damage, or misalignment.
• The photocells must be installed and maintained correctly to ensure proper safety reversal.

3. Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene komponente:

• 1 x SU1100 Drive Unit with integrated CBX10224 Control
• 1 x Base Plate with Base Hook
• 1 x Pair of LS LS22 Photocell Sensors
• 2 x Digital 572 2-channel Hand Transmitters
• 2 x ključa za otpuštanje u nuždi
• 2 x Polarized Switch Poles (for magnetic limit switches)

4. Tehničke specifikacije

5. Postavljanje i instalacija

Proper installation is crucial for the safe and efficient operation of your gate drive. Refer to the detailed diagrams and instructions provided in the separate installation guide for specific steps. Below are general guidelines.

5.1 Mounting the Drive Unit

Securely mount the SU1100 drive unit on a stable, level concrete base next to the gate opening. Ensure the drive unit is aligned correctly with the gate rack (not included) to allow smooth engagement of the gear.

Slika 2: Prednja strana view of the Marantec SU1100 drive unit, showing its compact design.

Slika 3: Detaljno view of the drive unit's robust gear mechanism, designed for smooth gate movement.

5.2 Električni priključak

Connect the drive unit to a suitable power supply according to local electrical regulations. The integrated CBX10224 control unit simplifies wiring. Ensure all connections are secure and properly insulated.

Slika 4: Interni view of the drive unit, highlighting the integrated control board and wiring terminals.

5.3 Ugradnja fotoćelija

Install the LS LS22 photocell pair on opposite sides of the gate opening, ensuring they are aligned and free from obstructions. These sensors provide a crucial safety feature by detecting obstacles in the gate's path.

5.4 Podešavanje graničnog prekidača

Adjust the magnetic limit flags to define the gate's open and closed positions. This system ensures precise stopping and prevents the gate from over-traveling.

6. Operacija

6.1 Rad na daljinskom upravljaču

Your Marantec Comfort Kit SU11000 comes with two Digital 572 2-channel hand transmitters. Pressing a programmed button on the transmitter will activate the gate. The gate will open or close, stopping automatically at the set limit positions or if an obstacle is detected by the photocells.

Figure 5: Operating the gate with the Marantec remote control.

Figure 6: The compact design of the Marantec remote control allows for convenient carrying.

6.2 Ručno prebacivanje

In case of power failure or malfunction, the gate can be operated manually using the emergency release keys. Insert the key into the designated lock on the drive unit and follow the instructions to disengage the motor, allowing the gate to be moved by hand.

Figure 7: The Marantec SU11000 gate opener installed, providing automated access.

7. Održavanje

Regular maintenance ensures the longevity and safe operation of your Marantec gate drive.

• mjesečno: Inspect the gate's movement for any resistance or unusual noises. Clean the gate rack and ensure it is free of debris.
• Kvartalno: Check the photocells for cleanliness and proper alignment. Test their functionality by breaking the beam while the gate is closing. The gate should stop and reverse.
• Godišnje: Have a qualified technician inspect the electrical connections, motor, and gear system. Lubricate moving parts as recommended by the manufacturer (refer to the full installation manual for specific lubrication points).
• Keep the drive unit housing clean and free of dirt and moisture.

8. Otkrivanje problema

This section addresses common issues you might encounter. For more complex problems, contact Marantec support or a qualified technician.

9. Garancija i podrška

Marantec products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Marantec webSačuvajte dokaz o kupovini za slučaj reklamacije.

For technical support, spare parts, or service inquiries, please contact Marantec customer service or an authorized Marantec dealer in your region. Contact information can typically be found on the Marantec webweb-mjestu ili u dokumentaciji vašeg proizvoda.

Proizvođač: Marantec
Model: Comfort Kit SU11000 (178409)