Mesqool Loud Alarm Clock with Bed Shaker

Uvod

The Mesqool CR1008i Loud Alarm Clock is designed to provide a reliable wake-up experience for heavy sleepers and individuals with hearing impairment. It features multiple alarm modes, a large LED display with adjustable brightness, a 7-color nightlight, and convenient dual USB charging ports.

Šta je u kutiji

• Glasni budilnik
• Shaker za krevet
• Uputstvo za upotrebu
• Adapter za napajanje
• 1.5 metar kabel

Setup

Napajanje budilnika

1. Connect the provided Power Adapter to the DC 5V IN port on the back of the alarm clock.
2. Plug the Power Adapter into a standard electrical outlet. The display will light up.
3. For battery backup, open the battery compartment on the back and insert 2 AAA batteries (not included). This will preserve time and alarm settings during a power outage.

Figure 1: Rear panel with power input, USB ports, and battery compartment. Insert 2 AAA batteries for backup power.

Connecting the Bed Shaker

4. Plug the Bed Shaker cable into the dedicated vibrator port on the back of the alarm clock.
5. Place the bed shaker under your pillow or mattress for effective vibration. The 70.8-inch long cord provides flexibility in placement.

Figure 2: The bed shaker positioned under a pillow for silent, vibrating alarm.

Uputstvo za upotrebu

Podešavanje vremena

• Pritisnite i držite POSTAVITE VRIJEME button on the top panel. The hour digits will begin to flash.
• Koristite + or - dugmad za podešavanje sata.
• Pritisnite POSTAVITE VRIJEME ponovo da biste potvrdili sate i prešli na podešavanje minuta. Cifre minuta će treptati.
• Koristite + or - dugmad za podešavanje minuta.
• Pritisnite POSTAVITE VRIJEME one more time to save the time setting.
• Za prebacivanje između 12-satnog i 24-satnog formata, pritisnite 12/24H dugme.
• Da biste aktivirali ili deaktivirali ljetno računanje vremena (DST), pritisnite dugme DST dugme.

Setting Alarms (AL1 & AL2)

The clock supports two independent alarms (AL1 and AL2).

• Pritisnite i držite AL1 or AL2 dugme. Cifre sati alarma će treptati.
• Koristite + or - dugmad za podešavanje željenog sata alarma.
• Pritisnite AL1 or AL2 again to confirm the hour and set the minutes. The alarm minute digits will flash.
• Koristite + or - dugmad za podešavanje željenih minuta alarma.
• Pritisnite AL1 or AL2 one more time to save the alarm setting.
• To choose the alarm mode (Buzzer, Vibrator, or Both), use the BUZZ/VIB slide switch on the side of the clock.
• To adjust the alarm volume, use the ALARM VOLUME slide switch on the side of the clock (Low, Medium, High).

Slika 3: Bočna strana view of the alarm clock with slide switches for selecting alarm mode (Buzzer, Vibrator, or Both) and alarm volume.

Funkcija odgode

• Kada se oglasi alarm, pritisnite veliko dugme SNOOZE OK button on the top of the clock to activate snooze. The alarm will pause for 9 minutes.
• Da biste potpuno isključili alarm, pritisnite ALARM ISKLJUČEN dugme.

Figure 4: The prominent snooze button on top of the alarm clock for easy access.

Noćno svjetlo i prigušivač

• The alarm clock features a 7-color night light. Press the SNOOZE OK button (which also functions as the light button) to cycle through the 7 colors or turn the night light off.
• The 7-inch LED display has a full slider dimmer (0%-100%). Use the DIMMER slide switch on the side of the clock to adjust the display brightness to your preference.

Figure 5: The alarm clock showcasing its 7-color night light options.

Dvostruki USB portovi za punjenje

• The alarm clock is equipped with two DC 5V/1A output USB charging ports on the back.
• Connect your smartphones, tablets, or other USB-powered devices to these ports for convenient charging.

Figure 6: Two smartphones charging simultaneously using the dual USB ports on the alarm clock.

Održavanje

• Clean the alarm clock and bed shaker with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Prije čišćenja provjerite je li uređaj isključen.
• Držite uređaj dalje od vode i visoke vlažnosti.

Rješavanje problema

Nema prikaza / Problem s napajanjem

• Check if the power adapter is securely plugged into both the clock and the wall outlet.
• Ensure the wall outlet is functioning correctly by plugging in another device.
• If using battery backup, ensure batteries are correctly inserted and not depleted.

Alarm Not Sounding/Vibrating

• Verify that the alarm (AL1 or AL2) is activated and set to the correct time.
• Provjerite BUZZ/VIB slide switch to ensure the desired mode (Buzzer, Vibrator, or Both) is selected.
• Podesite ALARM VOLUME slide switch to a higher setting if the buzzer is too quiet.
• Ensure the bed shaker is properly connected to its port.

Display Too Bright/Dim

• Koristite DIMMER slide switch on the side of the clock to adjust the display brightness.

Specifikacije