GODOX TT350N

Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

Model: TT350N

1. Uvod

Hvala na kupoviniasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Sigurnosne informacije

  • Ovaj proizvod uvijek držite suhim. Ne koristiti po kiši ili damp uslovima.
  • Do not disassemble. If repairs become necessary, this product must be sent to an authorized maintenance center.
  • Čuvati van domašaja djece.
  • Ne koristite blic u prisustvu zapaljivih gasova, hemikalija ili drugih materijala.
  • Do not touch the flash head immediately after use, as it may be hot.
  • Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Proizvod je gotovview

3.1 Ključne karakteristike

  • Full TTL Functionality: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
  • Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
  • Moćne funkcije: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
  • Wireless Grouping System: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
  • Zaštita od pregrijavanja: Designed with protection against overheating for extended use.
  • Efikasne performanse: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
  • Funkcija zumiranja: Automatic and manual zoom from 24mm to 105mm.
  • Personal Function Settings (C.Fn): Customizable settings for personalized operation.
  • Široka kompatibilnost: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

3.2 Sadržaj paketa

  • 1 x Godox TT350N Flash Unit
  • 1 x Mini postolje
  • 1 x Zaštitna torbica
  • 1 x Color Filter
  • 1 x Uputstvo za upotrebu
  • 1 x VFOTO Lens Cleaning Cloth
Godox TT350N Flash unit and included accessories

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Nazivi i funkcije dijelova

Diagram of Godox TT350N flash unit with numbered parts and their descriptions

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

  1. Zoom Selection Button
  2. Dugme za odabir načina rada
  3. Custom Function Setting Button (reusable button, long press for 2 seconds)
  4. Testno dugme/indikator spremnosti za bljesak
  5. LCD Panel
  6. Dugme za brzu sinhronizaciju
  7. S1/S2 Optic Slave Triggering Selection Button (in non-wireless mode)
  8. Group/Channel Button (reusable button, in wireless mode)
  9. Prekidač za napajanje
  10. Lock Ring
  11. Dugme za bežični odabir (dugme za višekratnu upotrebu, dugo pritisnite 2 sekunde)
  12. Hotshoe
  13. Dugme za podešavanje
  14. Odaberite Biraj
  15. Pretinac za baterije
  16. Optički kontrolni senzor
  17. Svjetlo za pomoć pri fokusiranju
  18. Flash Head
  19. Catchlight Panel
  20. Ugrađeni široki panel

4. Podešavanje

4.1 Instalacija baterije

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

  1. Otvorite poklopac pretinca za bateriju koji se nalazi sa strane blica.
  2. Umetnite dvije AA baterije prema oznakama polariteta (+/-) unutar odjeljka.
  3. Čvrsto zatvorite poklopac odeljka za baterije.

4.2 Montiranje na kameru

To mount the flash unit onto your camera's hotshoe:

  1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
  2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
  3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.
Godox TT350N flash unit with hotshoe connection detail

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Uključivanje/isključivanje napajanja

  • To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
  • To power off, slide the Power Switch to the 'OFF' position.

5. Načini rada

The TT350N offers various flash modes to suit different shooting scenarios. Press the MODE dugme za ciklično prebacivanje između dostupnih načina rada.

5.1 TTL automatski blic

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

  • Pritisnite MODE button until 'TTL' is displayed on the LCD panel.
  • The flash will automatically adjust its output based on the camera's metering.

5.2 Ručni režim blica (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

  • Pritisnite MODE button until 'M' is displayed.
  • Okrenite Odaberite Biraj to adjust the flash output power.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

  • Pritisnite MODE button until 'Multi' is displayed.
  • Koristite Odaberite Biraj i SET button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 Brza sinhronizacija (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

  • Pritisnite SYNC button to activate HSS. The HSS icon will appear on the LCD.

5.5 Sinhronizacija prve/druge zavjese

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

  • These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Kompenzacija ekspozicije blica (FEC)

FEC allows you to fine-tune the flash output in TTL mode, making the flash brighter or darker by up to ±3 stops in 1/3 stop increments.

  • U TTL režimu, pritisnite dugme SET button. The FEC value will blink.
  • Okrenite Odaberite Biraj to adjust the FEC value.
  • Pritisnite SET ponovo dugme za potvrdu.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview the lighting effect before taking the actual shot.

  • Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Diagram showing Godox TT350N as master and slave in a wireless flash setup

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

  • Glavna jedinica: The TT350N can control other Godox slave units such as AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, and TT600.
  • Podređena jedinica: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
  • To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
  • Koristite GR/CH dugme i Odaberite Biraj to set the group (A, B, C) and channel (1-16).
  • Ensure all units are set to the same channel and group for proper communication.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

  • S1 način rada: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
  • S2 način rada: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
  • To activate S1 or S2 mode, press the SLAVE button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

  • Dugo pritisnite C.Fn button for 2 seconds to enter the custom function settings menu.
  • Koristite Odaberite Biraj to navigate through the available functions.
  • Pritisnite SET button to select a function and then use the Odaberite Biraj da promeni svoju vrednost.
  • Pritisnite SET button again to confirm the change.
  • Dugo pritisnite C.Fn button again to exit the custom function settings.

8. Održavanje

  • Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
  • Remove batteries when the flash is not in use for an extended period to prevent leakage.
  • Čuvajte blic na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
  • Izbjegavajte jake udarce ili ispuštanje uređaja.

9. Otkrivanje problema

  • Blic se ne aktivira: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
  • Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
  • Problemi s bežičnim aktiviranjem: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
  • Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Specifikacije

ModelTT350N
Vodilica (GN)36 (ISO 100, 105 mm)
Flash pokrivenost24 do 105 mm (automatski/ručni zum)
Trajanje blica1/350 do 1/20000 sekundi
Sistem kontrole ekspozicijeTTL automatski blic, ručni blic, višestruki blic
Kompenzacija ekspozicije blica (FEC)±3 stepena u koracima od 1/3 stepena
Sync ModeBrza sinhronizacija (do 1/8000 s), sinhronizacija prve zavjesice, sinhronizacija druge zavjesice
Funkcija bežičnog blicaMaster, Slave, Off (2.4G Wireless X System, Optical S1/S2)
Kontrolirane slave grupe3 (A, B, and C)
Kanali16 (1-16)
Domet prijenosa 2.4GDo 100 metara
Izvor napajanja2 x AA batteries (Ni-MH recommended)
Vrijeme recikliranjaOtprilike 0.1-2.2 sekundi (sa Ni-MH baterijama)
Puna snaga treperiApprox. 210 (with 2500mA Ni-MH batteries)
Ušteda energijeAutomatic power off after approx. 90 seconds of idle operation (60 minutes if set as slave)
Dimenzije (D x Š x V)3.8 x 6.2 x 14 cm
Težina (bez baterija)200 g
Vrsta montažeHot Shoe-mount
Kompatibilne kamereNikon DSLR cameras (D810, D800, D750, D700, D610, D7100, D5200, D90, etc.)

11. Garancija i podrška

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox webMolimo sačuvajte dokaz o kupovini za potrebe reklamacije.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.