QFX BT-2

QFX BT-2 4-Inch Rechargeable Party Sound System User Manual

Model: BT-2

1. Uvod

Hvala na kupoviniasing the QFX BT-2 4-Inch Rechargeable Party Sound System. This manual provides essential information for the safe and efficient operation of your device. Please read these instructions thoroughly before use and retain them for future reference.

Sigurnosne informacije

  • Ne izlažite uređaj kiši ili vlazi kako biste spriječili požar ili strujni udar.
  • Ne otvarajte casing. Unutra nema dijelova koje korisnik može sam servisirati. Za sve servisne radove obratite se kvalifikovanom osoblju.
  • Keep the unit away from direct sunlight, heat sources, and extreme temperatures.
  • Osigurajte odgovarajuću ventilaciju oko uređaja tokom rada.
  • Koristite samo navedeni kabel za punjenje i adapter za napajanje.

2. Sadržaj paketa

Molimo Vas da provjerite da li se u Vašem paketu nalaze sve dolje navedene stavke:

  • QFX BT-2 4-Inch Rechargeable Party Sound System
  • USB kabl za punjenje
  • Uputstvo za upotrebu

3. Proizvod je gotovview

Familiarize yourself with the components and controls of your QFX BT-2 speaker.

QFX BT-2 4-Inch Rechargeable Party Sound System, front view showing speaker grille and control panel.

Slika 1: Prednja strana view of the QFX BT-2 speaker. This image displays the speaker grille, the control panel with various buttons, and the RGB LED disco light.

Control Panel (Typical Layout)

  • Dugme za napajanje: Uključuje ili isključuje jedinicu.
  • Dugme za način rada: Switches between Bluetooth, FM Radio, USB, and MicroSD modes.
  • Dugme za reprodukciju/pauzu: Reprodukuje ili pauzira reprodukciju zvuka.
  • Dugme za prethodno/smanjivanje jačine zvuka: Short press for previous track/station, long press to decrease volume.
  • Dugme za dalje/pojačavanje zvuka: Short press for next track/station, long press to increase volume.
  • Dugme Light Mode: Activates or changes the RGB LED disco light patterns.
  • USB port: Za reprodukciju zvuka sa USB fleš diskova.
  • Utor za microSD karticu: For playing audio from microSD cards.
  • DC 5V priključak za punjenje: Za spajanje USB kabla za punjenje.

4. Podešavanje

4.1 Punjenje zvučnika

  1. Connect the small end of the USB charging cable to the DC 5V Charging Port on the speaker.
  2. Povežite veći kraj USB kabla za punjenje na USB adapter za napajanje (nije uključen) ili USB priključak računara.
  3. The charging indicator light will illuminate, typically red, during charging. It will turn off or change color when fully charged.
  4. Prije prve upotrebe, ostavite otprilike 3-4 sata da se baterija potpuno napuni.

4.2 Uključivanje/isključivanje

  • Da biste uključili zvučnik, pritisnite i držite Dugme za napajanje for a few seconds until you hear an audible prompt or see the indicator lights activate.
  • To power off the speaker, press and hold the Dugme za napajanje again for a few seconds until the indicator lights turn off.

5. Uputstvo za upotrebu

5.1 Bluetooth uparivanje

  1. Uključite zvučnik. Automatski će ući u Bluetooth način uparivanja, što će biti naznačeno trepćućim LED svjetlom i zvučnim signalom.
  2. On your Bluetooth-enabled device (e.g., smartphone, tablet), go to the Bluetooth settings and enable Bluetooth.
  3. Traži available devices. You should see "QFX BT-2" or a similar name in the list.
  4. Select "QFX BT-2" to connect. Once paired, the speaker will emit an audible confirmation, and the LED light will stop flashing.
  5. You can now play audio from your device through the QFX BT-2 speaker.

5.2 Režim FM radija

  1. Pritisnite Dugme za način rada repeatedly until you enter FM Radio mode. An audible prompt will confirm the mode.
  2. Za automatsko skeniranje i spremanje dostupnih FM stanica, pritisnite i držite Dugme za reprodukciju/pauzuZvučnik će skenirati i pohraniti stanice.
  3. Kada se skeniranje završi, upotrijebite Prethodno i Next Buttons za navigaciju između sačuvanih stanica.

5.3 Reprodukcija sa USB/MicroSD kartice

  1. Insert a USB flash drive or a microSD card (with audio files in MP3 format) into the respective port/slot on the speaker.
  2. The speaker will automatically detect the storage device and switch to USB or MicroSD mode, beginning playback. If it does not switch automatically, press the Dugme za način rada da odaberete ispravan način rada.
  3. Koristite Pusti/Pauza, Prethodno, i Next Buttons za kontrolu reprodukcije.

5.4 Uparivanje putem pravog bežičnog stereo sistema (TWS)

TWS allows two QFX BT-2 speakers to connect wirelessly and play audio simultaneously for a stereo sound experience. A second QFX BT-2 speaker is required (sold separately).

  1. Ensure both QFX BT-2 speakers are powered on and in Bluetooth mode, but not connected to any other Bluetooth device.
  2. Na jednom od zvučnika (ovo će biti primarni zvučnik) pritisnite i držite Dugme za način rada for a few seconds until you hear a pairing tone.
  3. The two speakers will attempt to connect to each other. Once successfully paired, you will hear a confirmation tone.
  4. Now, connect your Bluetooth-enabled device to the primary speaker as described in section 5.1. Audio will play through both speakers in stereo.

5.5 RGB LED Disco Light

  • To activate the RGB LED disco light, press the Dugme za svjetlosni način rada.
  • Pritisnite Dugme za svjetlosni način rada repeatedly to cycle through different light patterns or to turn the light off.

6. Održavanje

  • čišćenje: Za čišćenje vanjske strane zvučnika koristite meku, suhu krpu. Nemojte koristiti tekuća sredstva za čišćenje ili abrazivne materijale.
  • Skladištenje: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to fully charge the battery every few months to maintain its lifespan.
  • Održavanje baterije: To prolong battery life, avoid completely draining the battery frequently. Charge the unit when the low battery indicator appears.

7. Otkrivanje problema

ProblemMogući uzrokRješenje
Zvučnik se ne uključuje.Baterija je prazna.Napunite zvučnik pomoću priloženog USB kabla.
Nije moguće uparivanje putem Bluetootha.Speaker is not in pairing mode or too far from the device.Ensure the speaker is in Bluetooth pairing mode. Move the speaker closer to your device (within 10 meters). Ensure no other device is already connected.
Nema zvuka iz zvučnika.Volume is too low or device is paused.Increase the volume on both the speaker and your connected device. Check if playback is paused.
Prijem FM radija je slab.Slab signal ili smetnje.Premjestite zvučnik na mjesto s boljim prijemom. Ponovo skenirajte stanice.
Reprodukcija sa USB/MicroSD kartice ne radi.Netačno file format or corrupted media.Osigurajte zvuk files are in MP3 format. Try a different USB drive or microSD card.

8. Specifikacije

  • Model: BT-2
  • Brand: QFX
  • Tehnologija povezivanja: Bluetooth
  • Način audio izlaza: Stereo
  • Vrsta zvučnika: Woofer
  • Prečnik subwoofera: 4 inča
  • Veličina zvučnika: 4 inča
  • Broj audio kanala: 2.0
  • Izvor napajanja: Battery Powered
  • baterija: 1 baterija specifična za proizvod (uključena)
  • Metoda kontrole: Dodir, Dugme
  • Dodatne karakteristike: FM Radio, RGB LED Disco Light, USB Input, MicroSD Card Input, TWS (True Wireless Stereo)
  • Težina artikla: 454 grama
  • Vrsta montaže: Tabletop Mount

9. Garancija i podrška

The QFX BT-2 4-Inch Rechargeable Party Sound System comes with a 1-godišnja ograničena garancija od datuma kupovine. Ova garancija pokriva proizvodne nedostatke u materijalima i izradi pri normalnoj upotrebi.

For warranty claims, technical support, or further assistance, please contact QFX customer service. Please have your product model number (BT-2) and proof of purchase ready when contacting support.

Note: Specific contact details for QFX customer service are not provided in this manual. Please refer to the QFX official website or your purchase documentation for support contact information.

© 2023 QFX. Sva prava pridržana. Informacije u ovom priručniku podložne su promjenama bez prethodne najave.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.