Mesqool Ultra-Clear Digital Alarm Clock

Uvod

Thank you for choosing the Mesqool Ultra-Clear Digital Alarm Clock. This device combines a large LED display with a unique time projection feature, dual alarms, and a convenient USB charging port, designed to enhance your daily routine. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure you get the most out of your new alarm clock.

The Mesqool Ultra-Clear Digital Alarm Clock, featuring its large display, time projection, and USB charging capability.

Setup

1. Raspakivanje: Carefully remove all components from the packaging. Ensure you have the alarm clock unit and the AC power adapter.
2. Priključak za napajanje:

   Connect the provided AC power adapter to the DC IN port on the back of the alarm clock. Plug the adapter into a standard wall outlet. The display will light up.

3. Instalacija rezervne baterije:

   For battery backup, open the battery compartment on the bottom of the unit. Insert two (2) AAA batteries (not included), observing the correct polarity (+/-). These batteries will preserve your time and alarm settings during a power outage and can trigger the alarm, but will not power the display.

   

   Insert two AAA batteries into the designated compartment for backup functionality.

4. Početno podešavanje vremena:

   Upon first power-up, the clock may display a default time. Refer to the "Setting Time" section under Operating Instructions to set the current time.

Uputstvo za upotrebu

Setting Time (12/24H Format)

1. Pritisnite i držite "SET TIME" dugme dok cifre sati ne počnu treptati.
2. Koristite "SAT" i "MINUTA" dugmad za podešavanje vremena.
3. Pritisnite "SET TIME" ponovo da biste potvrdili i prešli na sljedeću postavku.
4. Za prebacivanje između 12-satnog i 24-satnog formata, pritisnite "12/24 sata" button during time setting or normal operation.

Setting Dual Alarms

The clock features two independent alarms (ALARM1 and ALARM2).

1. Pritisnite i držite bilo koji "ALARM1" or "ALARM2" dugme dok cifre vremena alarma ne zatrepću.
2. Koristite "SAT" i "MINUTA" dugmad za podešavanje željenog vremena alarma.
3. Press the respective alarm button again to confirm.
4. Da biste aktivirali/deaktivirali alarm, kratko pritisnite "ALARM1" or "ALARM2" dugme. Ikona indikatora će se pojaviti/nestati na ekranu.
5. Podešavanje jačine zvuka alarma: During an active alarm, press the "VOL-" or "VOL+" buttons to adjust the alarm volume. There are multiple levels of volume adjustment.


The alarm volume can be adjusted to your preferred level, from quiet to loud.

Funkcija odgode

Kada se oglasi alarm, pritisnite veliko dugme "ODLOŽI/U REDU" button on top of the clock to temporarily silence the alarm for 9 minutes. The alarm will sound again after the snooze period.

Activate the 9-minute snooze function by pressing the large SNOOZE/OK button.

Time Projection Features

The Mesqool alarm clock can project the time onto your wall or ceiling.

• Ugao projekcije: The projector lens can be rotated 180 degrees to adjust the projection angle.
• Podešavanje fokusa: Rotate the focus ring on the projector to achieve a clear and sharp projection image.
• Projection Reversal: If the projected time appears upside down, press the "FLIP" button (or similar, refer to specific button on your model) to reverse the projection 180 degrees.
• Svjetlina projekcije: The projection brightness can be adjusted. Locate the "PROJECTION DIMMER" switch or button on the side of the projector. There are 5 levels of brightness.

Adjust the projection angle, focus, and flip the image for optimal viewing.


Select from 5 levels of projection brightness to suit your environment.



The projection dimmer switch is located on the side of the projector.

Zaslon zatamnjivanja

The main LED display has 5 levels of brightness. Press the "DIMMER" button (or similar, refer to specific button on your model) repeatedly to cycle through the brightness levels, from brightest to off.

The large LED display offers clear visibility and adjustable brightness.

USB priključak za punjenje

A USB charging port is located on the back of the unit. Connect your smartphone or other USB-powered devices to this port for convenient charging. This port is for charging only and does not support data transfer.

Utilize the integrated USB port to conveniently charge your devices.

Ljetno računanje vremena (DST)

Pritisnite "Ljetno vrijeme" button to activate or deactivate Daylight Saving Time. The clock will automatically adjust by one hour forward or backward.

Održavanje

• čišćenje: Use a soft, dry cloth to clean the surface of the alarm clock. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Zamjena baterije: Replace the AAA backup batteries annually or when the battery indicator (if present) suggests low power. Ensure the clock is powered by the AC adapter when replacing batteries to avoid losing settings.
• Opšta njega: Avoid placing the clock in direct sunlight, near heat sources, or in areas with high humidity. Do not expose the unit to water or other liquids.

Rješavanje problema

Specifikacije

• Model: MS-CR01F
• Vrsta prikaza: LED
• Izvor napajanja: AC adapter (uključen)
• Rezervna kopija baterije: 2 x AAA baterije (nisu uključene)
• Wattage: 10 vati
• Dimenzije: 20.32 x 3.81 x 9.14 cm (8 x 1.5 x 3.6 inča)
• Težina: 240 g (0.53 lbs)
• Udaljenost projekcije: Optimal 1.5 - 3 meters (5 - 10 feet)
• Posebne karakteristike: Time Projection, USB Charging Port, Dual Alarms, Snooze, DST, 12/24H Modes, 5-Level Display Dimmer, Adjustable Alarm Volume.

Garancija i podrška

Mesqool products are designed and manufactured to the highest quality standards. For any questions, technical support, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Mesqool webMolimo sačuvajte dokaz o kupovini za potrebe reklamacije.

Za više informacija posjetite Mesqool Store on Amazon.