TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Uvod

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke. Ako neke stavke nedostaju ili su oštećene, obratite se svom prodavaču.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Adapter za napajanje
• USB miš
• Daljinski upravljač
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Vodič za brzi početak

Slika 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Sigurnosne informacije

Molimo vas da se pridržavate sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje uređaja:

• Osigurajte napajanje voltage is correct before connecting the NVR.
• Ne izlažite NVR vodi ili vlazi.
• Izbjegavajte postavljanje NVR-a na direktnu sunčevu svjetlost ili u blizinu izvora topline.
• Install the NVR in a well-ventilated area to prevent overheating.
• Do not open the NVR casing. Za sve servisne radove obratite se kvalifikovanom osoblju.
• Koristite samo dodatke koje je odredio proizvođač.

3. Proizvod je gotovview

NVR Front and Rear Panels

Slika 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Front Panel Indicators and Controls:

• SNAGA: Indikator napajanja.
• STATUS: Indikator statusa sistema.
• Prijem/Odašiljanje: Data transmission/reception indicator.
• Kontrolna dugmad: For menu navigation and system control.
• USB port: For mouse or USB storage device connection.

Rear Panel Interfaces:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• AUDIO IN/OUT: Za eksterne audio uređaje.
• LAN port: Connect to your network router/switch.
• HDMI izlaz: Connect to a monitor for high-resolution video output (up to 4K).
• VGA izlaz: Connect to a monitor for video output (up to 1080p).
• Power Input (48V): Spojite priloženi adapter za napajanje.
• Prekidač: To turn the NVR on/off.

Ključne karakteristike

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• Podrška uživo view, storage, and playback of connected cameras.

4. Podešavanje

4.1 Instalacija tvrdog diska (opcionalno)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. Odvrnite i uklonite gornji poklopac NVR-a.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Pričvrstite tvrdi disk na kućište NVR-a pomoću priloženih vijaka.
4. Vratite gornji poklopac i pričvrstite ga vijcima.

4.2 Povezivanje kamera

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Slika 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connecting to a Display and Network

• Spojite monitor na HDMI ili VGA izlazni priključak NVR-a.
• Spojite USB miš na jedan od USB priključaka NVR-a.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewing sposobnosti.

4.4 Uključivanje

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Uputstvo za upotrebu

5.1 Čarobnjak za početno podešavanje

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 Uživo View

Nakon početnog podešavanja, NVR će prikazivati ​​sliku uživo view povezanih kamera. Možete prebacivati ​​između pojedinačnih kamera view i mreža s više kamera view using the on-screen controls or the remote control.

5.3 Snimanje

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Reprodukcija

Pristup snimljen footage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Network Access and Remote Viewing

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Održavanje

6.1 Upravljanje tvrdim diskom

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 Ažuriranja firmvera

Provjerite proizvođača website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Čišćenje

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

7. Otkrivanje problema

• Nema napajanja:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.

• Nema video izlaza:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Kamere se ne prikazuju:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Nema snimanja:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.

• Problemi s daljinskim pristupom:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web postavke pretraživača.

8. Specifikacije

9. Garancija i podrška

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL webSačuvajte račun kao dokaz o kupovini za reklamacije u slučaju reklamacije.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.