1. Uvod
This manual provides detailed instructions for the safe and effective operation of the BTMETER BT-6688B Digital Insulation Resistance Tester. The BT-6688B is a high-performance digital megohmmeter designed for measuring insulation resistance, AC voltage, and frequency. It features a wide testing voltage range and a protective casing za izdržljivost.
2. Sigurnosne informacije
Always adhere to safety precautions when using this device. Failure to do so may result in electric shock, injury, or damage to the meter. This device complies with IEC-1010 double insulation and overvoltage category II safety standards.
- Prije upotrebe provjerite je li mjerač u dobrom radnom stanju.
- Do not operate the meter if the casing is damaged or if any part is exposed.
- Always use the correct test leads and accessories provided with the meter.
- Izbjegavajte dodirivanje mjernih kablova ili strujnih kola tokom mjerenja, posebno pri visokom naponutage je prisutan.
- During any rated voltage measurement, if the measured resistance is less than 5 MΩ, the measurement time should not exceed 10 seconds.
- The meter generates high voltage during insulation resistance tests. Exercise extreme caution.
- Do not use the meter in wet environments or in the presence of explosive gases or dust.
- Pogledajte lokalne propise i propise o električnoj sigurnosti.
3. Sadržaj paketa
Prilikom otvaranja paketa provjerite da li su svi artikli prisutni i neoštećeni.
- BTMETER BT-6688B Digital Insulation Resistance Tester
- Ispitni kablovi (crveni i crni)
- Large Test Clip (Black)
- Uputstvo za upotrebu
- Torba za nošenje
Image: Contents of the BTMETER BT-6688B package, showing the main unit, test leads, and carrying case.
4. Proizvod je gotovview
Familiarize yourself with the components and controls of the BT-6688B tester.
Image: Detailed diagram of the BT-6688B tester, highlighting the LCD, high voltage indicator, test/stop switch, data hold key, backlight switch, rating voltage rotating switch, input terminals (E, COM, V~, L), and protective casing.
Ključne komponente:
- LCD: Displays measurement readings and status indicators.
- Visok voltage Startup Switch (TEST/STOP): Initiates and terminates insulation resistance tests.
- Data Holding Key (HOLD): Zamrzava trenutno očitavanje ekrana.
- Backlight Switch (LIGHT): Aktivira ili deaktivira pozadinsko osvjetljenje LCD ekrana.
- Visok voltage Indicator Light (HV): Svetli pri visokoj jačini zvukatage is present during testing.
- Rating Voltage Rotating Switch: Selects the desired test voltage (100V, 250V, 500V, 1000V, 2500V, 5000V) or AC voltage measurement (750V~).
- Input Terminals (E, COM, V~, L): Connection points for test leads based on the measurement type.
- Zaštitni Casing: Provides insulation and protection against drops.
5. Podešavanje
5.1 Instalacija baterije
The BT-6688B requires batteries for operation. Ensure the meter is OFF before installing or replacing batteries.
- Carefully remove the protective casing from the meter.
- Pronađite odjeljak za baterije na stražnjoj strani mjerača.
- Otvorite poklopac odeljka za baterije.
- Insert the required batteries, observing correct polarity.
- Close the battery compartment cover and reattach the protective casing.
Image: The BT-6688B meter with its protective casing removed, revealing the battery compartment. This image also shows the meter's dimensions.
5.2 Spajanje mjernih kabela
Proper connection of test leads is essential for accurate and safe measurements. Refer to the product overview for terminal locations.
Image: A set of test leads and accessories, including standard probes and a large alligator clip, used with the BT-6688B tester.
6. Uputstvo za upotrebu
6.1 AC Voltage Measurement
The BT-6688B can measure AC voltage from 1V to 750V with a frequency range of 40Hz to 400Hz.
- Provjerite je li mjerač ISKLJUČEN.
- Insert the red test lead into the "V~" terminal and the black test lead into the "COM" terminal.
- Turn the rotating switch to the "750V~" position.
- Carefully connect the test probes to the circuit or device where AC voltage needs to be measured.
- Pročitajte AC voltage vrijednost prikazana na LCD-u.
Video: This video demonstrates the unboxing, setup, and operation of the BTMETER BT-6688B, including a demonstration of AC voltage measurement using the test leads connected to a power strip.
6.2 Mjerenje otpora izolacije
The BT-6688B measures insulation resistance from 0.1 MΩ to 200 GΩ with selectable test voltages.
- Ensure the meter is OFF and the circuit under test is de-energized.
- Insert the red test lead into the "L" terminal and the black test lead (with the large clip) into the "E" terminal.
- Clamp the large test clip to one end of the object to be tested (e.g., ground or neutral).
- Select the desired insulation test voltage (100V, 250V, 500V, 1000V, 2500V, or 5000V) using the rotating switch.
- Connect the red test probe to the other end of the object to be tested (e.g., live conductor).
- Press the "TEST/STOP" button to initiate the test. The "HV" indicator will light up, indicating high voltage izlaz.
- Read the insulation resistance value displayed on the LCD.
- Press "TEST/STOP" again to stop the test and discharge the circuit.
Image: The BT-6688B tester actively measuring insulation resistance on an electrical panel, demonstrating a typical application.
7. Održavanje
- čišćenje: Za čišćenje mjerača koristite meku, suhu krpu. Ne koristite abrazivna sredstva ili rastvarače.
- Skladištenje: Čuvajte mjerač na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura. Izvadite baterije ako ga skladištite duži period.
- Zamjena baterije: Replace batteries when the low battery indicator appears on the LCD.
- kalibracija: For optimal accuracy, periodic calibration by qualified personnel is recommended.
8. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Mjerač se ne uključuje. | Prazne ili nepravilno instalirane baterije. | Provjerite ugradnju baterije i zamijenite ako je potrebno. |
| Netačna očitavanja. | Poor test lead connection, incorrect range selection, or meter requires calibration. | Ensure secure connections, select appropriate range, or consider professional calibration. |
| "HV" indicator does not light up during insulation test. | "TEST/STOP" button not pressed, or internal fault. | Press "TEST/STOP" firmly. If issue persists, contact support. |
| Na displeju se prikazuje "OL" (preopterećenje). | Mjerenje prelazi odabrani raspon. | Select a higher range or verify the circuit under test. |
9. Specifikacije
| Feature | Detalj |
|---|---|
| Model | BT-6688B |
| Opseg otpora izolacije | 0.1 MΩ to 200 GΩ |
| Insulation Resistance Accuracy | 3% to 10% + 5 digits |
| Test Voltages | 100V, 250V, 500V, 1000V, 2500V, 5000V |
| AC Voltage Measurement | 1V do 750V |
| Frequency Range (AC Voltage) | 40Hz do 400Hz |
| Sigurnosni standard | IEC-1010 Double Insulation, Overvoltage Kategorija II |
| Display | LCD sa pozadinskim osvetljenjem |
| Zadržavanje podataka | Da |
| Izvor napajanja | Baterije (nisu uključene) |
| Dimenzije | 26.42 x 23.37 x 8.89 cm |
| Težina | 900 g |
10. Garancija i podrška
The BTMETER BT-6688B Digital Insulation Resistance Tester comes with a 1-year warranty from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
For technical support, warranty claims, or service inquiries, please contact BTMETER customer service through the retailer where the product was purchased or visit the official BTMETER webstranica za kontakt informacije.