1. Proizvod je gotovview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Ključne karakteristike:
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Kapacitet rezanja: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Zaštitnik: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Sigurnosna uputstva
Uvijek pročitajte i razumite sva sigurnosna upozorenja, upute, ilustracije i specifikacije koje se isporučuju s ovim električnim alatom. Nepoštivanje svih dolje navedenih uputa može dovesti do strujnog udara, požara i/ili ozbiljnih ozljeda.
Opća sigurnosna upozorenja:
- Nosite odgovarajuću ličnu zaštitnu opremu (LZO), uključujući zaštitne naočale, zaštitu za sluh i rukavice.
- Osigurajte da je radni prostor čist, dobro osvijetljen i bez prepreka.
- Držite djecu i osobe u blizini dok rukujete alatom.
- Never operate the tool if the power cord or plug is damaged.
- Uvijek isključite napajanje prije bilo kakvih podešavanja, promjene pribora ili održavanja.
- Koristite ispravnu oštricu za materijal koji se reže.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Components Overview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Motorna jedinica
- Rezervoar za vodu
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Zaštita oštrice
- On/Off prekidač
- Drška za nošenje
Slika 1: Gotovoview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Podešavanje
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Raspakivanje i pregled
- Pažljivo izvadite sve komponente iz pakovanja.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Provjerite da li su sve navedene komponente prisutne.
4.2 Punjenje rezervoara za vodu
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Regularly check the water level during operation and refill as needed.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Uputstvo za upotrebu
Follow these steps for safe and effective tile cutting.
5.1 Uključivanje/isključivanje
- Connect the tile cutter to a suitable power outlet (240 Volts).
- To turn on, press the green 'ON' button.
- To turn off, press the red 'OFF' button.
Figure 4: Power switch for turning the machine on and off.
5.2 Pravljenje reza
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Official Product Video: How to Use
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. Održavanje
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Cleaning the Water Reservoir
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Isključite napajanje.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Ponovo sastavite komponente.
6.2 Zamjena oštrice
Replace the diamond cutting disc when it becomes dull or damaged.
- Provjerite da li je alat isključen iz struje.
- Koristite priloženi alat za otpuštanje matice za pričvršćivanje oštrice.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Čvrsto zategnite pričvrsnu maticu.
7. Otkrivanje problema
This section addresses common issues you might encounter with your tile cutter.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| Mašina se ne pokreće | No power supply; faulty switch; motor issue. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. Specifikacije
| Feature | Detalj |
|---|---|
| Brand | Einhell |
| Broj modela | 4301185 |
| Snaga | 800 Watts |
| Voltage | 240 Volts |
| Brzina | 2950 RPM |
| Diamond Cutting Disc Diameter | 180 mm |
| Maks. visina rezanja (90°) | 34 mm |
| Maks. visina rezanja (45°) | 14 mm |
| Angle of Cut | 45 stepeni |
| Dimenzije stola (D x Š) | 39.6 cm x 38.5 cm |
| Dimenzije proizvoda (D x Š x V) | 39.6l. x 38.5an. x 25.5al. centimeters |
| Težina proizvoda | 9.1 kilograma |
| Izvor napajanja | Električni sa kablom |
| Posebne karakteristike | Adjustable angle stop, parallel stop with scale |
9. Garancija i podrška
9.1 Informacije o garanciji
This Einhell product comes with a 2 godine ograničene garancijeMolimo sačuvajte dokaz o kupovini za bilo kakve reklamacije u vezi s garancijom.
9.2 Korisnička podrška
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webnajnovije kontakt informacije potražite na web stranici ili na pakovanju vašeg proizvoda.