Lenco L-30BK Belt Drive Turntable Instruction Manual

1. Uvod

This manual provides essential information for the safe and efficient operation of your Lenco L-30BK Belt Drive Turntable. Please read these instructions thoroughly before using the device and retain them for future reference. The Lenco L-30BK is designed for playing vinyl records at 33 and 45 RPM, featuring a built-in preamplifier and USB connectivity for digitizing your vinyl collection.

2. Sigurnosne informacije

• Izvor napajanja: Osigurajte napajanje voltage odgovara zahtjevima navedenim na uređaju. Koristite samo priloženi adapter za napajanje.
• Voda i vlaga: Ne izlažite uređaj kiši, vlazi ili kapanju/prskanju tekućina. Ne stavljajte predmete napunjene tekućinom, poput vaza, na uređaj.
• ventilacija: Osigurajte adekvatnu ventilaciju. Ne blokirajte ventilacijske otvore.
• toplina: Držite uređaj dalje od izvora toplote kao što su radijatori, grijalice, peći ili drugi uređaji (uključujući ampLifiers) koji proizvode toplotu.
• čišćenje: Isključite uređaj iz zidne utičnice prije čišćenja. Koristite meku, suhu krpu. Ne koristite tekuća sredstva za čišćenje ili aerosolna sredstva za čišćenje.
• servisiranje: Ne pokušavajte sami servisirati ovaj proizvod. Sve servise prepustite kvalificiranom servisnom osoblju.
• plasman: Place the turntable on a stable, level surface to prevent vibrations and ensure proper playback.

3. Sadržaj paketa

Molimo Vas da provjerite da li su sve dolje navedene stavke uključene u paket:

• Lenco L-30BK Turntable Unit
• Dust Cover
• Platter
• Pojas
• Slipmat
• Napajanje ispravljač
• USB kabel
• RCA audio kabel
• Uputstvo za upotrebu
• Pick-up Needle (pre-installed on cartridge)

4. Proizvod je gotovview

Familiarize yourself with the components of your Lenco L-30BK turntable.

Slika 4.1: Front view of the Lenco L-30BK Turntable with the dust cover open, revealing the main components including the platter, tonearm, and control buttons.

Slika 4.2: Rear panel connections of the Lenco L-30BK, including RCA audio outputs (L/R), USB port, DC12V power input, and the main power switch.

Ključne komponente:

• tanjir: Kružna platforma na kojoj se postavljaju zapisi.
• Tonarm: Holds the cartridge and stylus, which reads the grooves of the record.
• Cartridge and Stylus: Converts physical vibrations into electrical signals. The L-30BK features a Movable Magnet Sensor (MMC) with an individually replaceable stylus.
• Birač brzine: Switch to select between 33 and 45 RPM playback speeds.
• Automatsko isključivanje: Automatically stops the platter rotation at the end of a record.
• Poklopac za prašinu: Štiti gramofon od prašine kada se ne koristi.
• RCA Audio Outputs (L/R): Za povezivanje s vanjskim amplifier ili aktivni zvučnici.
• USB port: For connecting to a computer to digitize vinyl records.
• Ulazno napajanje DC12V: Za povezivanje strujnog adaptera.

5. Podešavanje

5.1 Raspakivanje i postavljanje

1. Pažljivo izvadite gramofon iz ambalaže.
2. Place the unit on a stable, level surface, away from direct sunlight, heat sources, and excessive dust or vibrations.
3. Install the dust cover by aligning its hinges with the slots on the back of the turntable.

Slika 5.1: The Lenco L-30BK Turntable with its protective dust cover closed, ready for placement.

5.2 Instalacija tanjira i remena

1. Postavite tanjir na osovinu gramofona.
2. Locate the drive belt, typically found underneath the platter or separately packaged.
3. Carefully stretch the drive belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.
4. Postavite slipmat na vrh tanjira.

5.3 Audio veza

The L-30BK has a built-in preamplifier, allowing direct connection to most audio systems.

• Connect the RCA audio cable (red for right channel, white for left channel) from the AUDIO OUT jacks on the rear of the turntable to the LINE IN or AUX IN jacks on your amplifier ili aktivni zvučnici.

5.4 Priključak za napajanje

• Connect the DC12V power adapter to the DC12V POWER input on the rear of the turntable.
• Uključite adapter za napajanje u odgovarajuću zidnu utičnicu.

5.5 USB Connection (for Digitization)

• To digitize your vinyl records, connect the USB cable from the USB port on the rear of the turntable to an available USB port on your computer (PC or Mac).

6. Uputstvo za upotrebu

6.1 Uključivanje/isključivanje

• Flip the ON/OFF switch on the rear panel to the 'ON' position to power on the turntable.
• Flip the switch to 'OFF' when not in use.

6.2 Reprodukcija ploče

1. Postavite ploču na tanjir, pazeći da bude centrirana.
2. Select the appropriate speed (33 or 45 RPM) using the speed selector switch. For 45 RPM singles, place the included adapter on the spindle if needed.
3. Podignite ručicu gramofona pomoću poluge za podešavanje zvuka.
4. Ručno postavite ručicu gramofona preko željenog početnog žlijeba ploče.
5. Gently lower the tonearm using the cueing lever. The stylus will descend onto the record, and playback will begin.
6. At the end of the record, the auto shut-off function will stop the platter rotation. Lift the tonearm and return it to its rest.

Slika 6.1: Proper technique for lowering the tonearm onto a record for playback.

Slika 6.2: Detaljno view of the Movable Magnet Sensor (MMC) cartridge and stylus assembly.

6.3 Digitizing Records via USB

The L-30BK allows you to convert your vinyl records into digital audio files korištenjem računara.

1. Povežite gramofon sa računarom pomoću priloženog USB kabla.
2. Download and install audio recording software such as Audacity (available online for free) on your computer.
3. Open the recording software and select the USB Audio Device as the input source.
4. Start recording in the software, then begin playing your record on the turntable as described in section 6.2.
5. Once the record finishes, stop the recording in the software and save your digitized audio file.

7. Održavanje

7.1 Čišćenje gramofona

• Always unplug the turntable from the power outlet before cleaning.
• Use a soft, dry, lint-free cloth to wipe the cabinet and dust cover.
• Ne koristite abrazivna sredstva za čišćenje, voskove ili rastvarače jer mogu oštetiti završnu obradu.

7.2 Stylus Care and Replacement

• The stylus is a delicate component. Avoid touching it with your fingers.
• Clean the stylus regularly using a soft brush, gently brushing from back to front.
• The stylus should be replaced after approximately 300-500 hours of playback, or if you notice a degradation in sound quality.
• To replace the stylus, carefully pull the old stylus assembly forward and down from the cartridge. Insert the new stylus assembly by pushing it upwards and backwards into the cartridge until it clicks into place.

8. Otkrivanje problema

If you encounter problems with your turntable, refer to the following common issues and solutions:

9. Specifikacije

10. Garancija i podrška

Lenco products are manufactured to high quality standards. In the event of a defect, your product is covered by the terms of the warranty in your country of purchase. For detailed warranty information, please refer to the warranty card included with your product or visit the official Lenco website. For technical support or service inquiries, please contact Lenco customer service through their official channels.