Dayton Audio PC83-4

Dayton Audio PC83-4 3-inch Full-Range Poly Cone Driver

Model: PC83-4

Uvod

The Dayton Audio PC83-4 is a 3-inch full-range poly cone driver designed for various audio applications, including MTM bookshelves, car audio systems, and line arrays. This manual provides essential information for the proper installation, operation, and maintenance of your speaker driver to ensure optimal performance and longevity.

Karakteristike proizvoda

  • Copper cap to keep inductance under control and extend high frequency response.
  • Poly damped woven glass fiber cone controls cone break-up and provides a smooth roll-off.
  • Smooth response with true full-range reproduction for simple speaker designs.
  • High energy ferrite magnet increases BL for higher efficiency and more output.
  • Suitable for MTM bookshelves, car audio, or line array applications.

Sadržaj paketa

  • 1 x Dayton Audio PC83-4 3-inch Full-Range Poly Cone Driver

Sigurnosne informacije

UPOZORENJE: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Handle with care and wash hands after handling.

Always ensure proper electrical connections and observe polarity when wiring. Avoid exceeding the maximum power handling capacity of the driver to prevent damage. Do not expose the driver to excessive moisture or extreme temperatures.

Setup

Montaža

The PC83-4 driver is designed for secure mounting in an appropriate enclosure or baffle. Ensure the mounting surface is rigid and free from vibrations. Use appropriate screws and gaskets to create an airtight seal around the driver's frame.

Front view of the Dayton Audio PC83-4 3-inch full-range poly cone driver.

Slika 1: Prednja strana view of the Dayton Audio PC83-4 driver, showing the poly cone and surround.

Pozadi view of the Dayton Audio PC83-4 3-inch full-range poly cone driver showing terminals.

Slika 2: Pozadi view of the Dayton Audio PC83-4 driver, illustrating the magnet structure and wiring terminals.

Ožičenje

Connect the speaker wires to the terminals on the rear of the driver. The positive (+) terminal is typically marked with a red dot or a larger tab, and the negative (-) terminal is marked with a black dot or a smaller tab. Ensure correct polarity for all drivers in your system to maintain proper phase alignment.

Close-up view of the copper cap and voice coil assembly inside the speaker driver.

Slika 3: Interni view showing the copper cap and voice coil, which contribute to extended high-frequency response.

Operating

Amppriključak za dizalicu

Connect the PC83-4 driver to a suitable audio amplifier. Osigurajte amplifier's impedance output matches the driver's impedance (4 Ohms). Start with a low volume level and gradually increase it to your desired listening level. Avoid driving the speaker with an amplifier that delivers power significantly beyond the driver's maximum output power to prevent damage.

Enclosure Design Considerations

For optimal sound reproduction, especially in the lower frequencies, the PC83-4 should be installed in a properly designed and constructed speaker enclosure. The enclosure's volume and port tuning (if applicable) will significantly impact the driver's performance. Consult speaker design resources for guidance on appropriate enclosure types and dimensions for this driver.

Održavanje

The Dayton Audio PC83-4 requires minimal maintenance. Keep the driver free from dust and debris. Use a soft, dry cloth to gently wipe the cone and frame. Avoid using harsh chemicals or abrasive materials, as these can damage the speaker components. Ensure the speaker is not exposed to direct sunlight for prolonged periods or extreme temperature fluctuations.

Rješavanje problema

  • Nema zvuka: Check all wiring connections for proper contact and polarity. Verify that the amplifier is powered on and functioning correctly. Ensure the audio source is active and volume is turned up.
  • izobličeni zvuk: Smanjite amplifier's volume. Check for damaged speaker wires or loose connections. Ensure the amplifier's power output is not exceeding the speaker's maximum power handling. Inspect the speaker cone for any physical damage.
  • Slab ili neujednačen zvuk: Confirm correct polarity for all drivers in a multi-speaker setup. Check for any obstructions in front of the speaker.

Specifikacije

SpecifikacijaVrijednost
BrandDayton Audio
Naziv modelaPC83-4
Maksimalna izlazna snaga zvučnika60 Watts
Tehnologija povezivanjaŽičani
Način audio izlazaStereo, 3.0 Surround zvuk
Ulazni voltage2.83 Volts
Vrsta montažeCar Mount, Freestanding
Vrsta zvučnikaSurround Sound
Woofer Diameter3 inča
BojaCrna
Težina artikla1.15 funti
Dimenzije artikla D x Š x V3.5"D x 3.5"Š x 2.2"H

Informacije o garanciji

This Dayton Audio PC83-4 driver comes with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the documentation included with your purchase or visit the official Dayton Audio website. The return policy allows for returns within 30 days for refund or replacement.

Podrška

For further assistance, technical support, or to explore other Dayton Audio products, please visit the official Dayton Audio store or contact their customer service department.

Official Dayton Audio Store: Dayton Audio Store on Amazon

Povezani dokumenti - PC83-4

Preview Dayton Audio Epique E150HE-44 5-1/2" Woofer Specification Sheet
Technical specifications and performance data for the Dayton Audio Epique E150HE-44 5-1/2" carbon fiber cone dual voice coil woofer, featuring MMAG motor technology.
Preview Blast Box Portable Bluetooth Speaker Kit Assembly Manual
Comprehensive assembly manual for the Blast Box Portable Bluetooth Speaker Kit, detailing parts, tools, enclosure assembly, crossover construction, and final assembly. Includes amplifier controls and operation guide.
Preview Dayton Audio Passive Reference 8" Mini Subwoofer Kit Assembly Manual
Assembly instructions for the Dayton Audio Passive Reference 8" Mini Subwoofer Kit, including tools, components, and step-by-step construction guide.
Preview Dayton Audio 1,000 Watt 15" Reference Subwoofer Kit Assembly Guide
Step-by-step guide to assembling the Dayton Audio 1,000 Watt 15" Reference Subwoofer Kit, covering all components, enclosure construction, acoustic treatment, and final assembly.
Preview Orian 3-Way High Output Speaker Kit Assembly Guide
Comprehensive assembly instructions for the Dayton Audio Orian 3-Way High Output Speaker Kit. Learn how to build your own high-fidelity bookshelf speakers with detailed steps, component lists, and tips for open-back or damped rear chamber configurations.
Preview Vodič za montažu kompleta tornjastih zvučnika TriTrix MTM TL
Sveobuhvatan vodič za sastavljanje TriTrix MTM TL kompleta zvučnika, uključujući popise komponenti, alate i detaljne upute za sastavljanje kućišta i skretnice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.