mophie 3673_JPA-IP7

mophie Juice Pack Wireless Charging Protective Power Pack Case for iPhone 7, iPhone 8, and iPhone SE User Manual

Model: 3673_JPA-IP7

Uvod

The mophie Juice Pack Wireless Charging Protective Power Pack Case is designed to extend the battery life of your iPhone 7, iPhone 8, or iPhone SE while providing enhanced protection. This case integrates Charge Force Technology, allowing for convenient wireless charging with Qi-enabled systems and other compatible wireless charging accessories. It also features pass-through charge and sync capabilities.

Kompatibilni uređaji: iPhone 7, iPhone 8, iPhone SE (4.7-inch models)

Šta je u kutiji

  • mophie Juice Pack Case
  • Mikro USB kabl
  • Vodič za brzi početak

Setup

Installing Your iPhone

  1. Separate the top cap from the main body of the Juice Pack case.
  2. Slide your iPhone into the bottom section of the Juice Pack case, ensuring the Lightning connector on the phone properly aligns and connects with the connector inside the case.
  3. Once the iPhone is seated, slide the top cap back onto the case until it clicks securely into place.
Front view of mophie Juice Pack case with iPhone installed

Slika 1: Prednja strana view of the mophie Juice Pack case with an iPhone installed.

Nazad view of mophie Juice Pack case with iPhone installed, showing LED indicators

Slika 2: Natrag view of the mophie Juice Pack case with an iPhone installed, highlighting the LED indicators.

Početno punjenje

Before first use, fully charge your mophie Juice Pack case. Connect the included Micro USB cable to the charging port on the bottom of the case and plug the other end into a USB power adapter (not included) or a computer's USB port. The LED indicator lights on the back of the case will illuminate to show charging progress.

Operating the Juice Pack

Activating/Deactivating Charging

To begin charging your iPhone from the Juice Pack case, press and hold the power button on the back of the case for 2 seconds. The LED indicator lights will illuminate, and your iPhone will begin charging. To stop charging, press and hold the power button again for 2 seconds.

LED indikatorska svjetla

The four LED lights on the back of the Juice Pack case indicate the remaining battery charge and charging status:

  • 4 stalna svjetla: 75-100% naplaćeno
  • 3 stalna svjetla: 50-74% naplaćeno
  • 2 stalna svjetla: 25-49% naplaćeno
  • 1 Neprekidno svjetlo: 1-24% naplaćeno
  • Trepćuća svjetla: Futrola se puni

Wireless Charging (Charge Force Technology)

The mophie Juice Pack case features Charge Force Technology, making it compatible with Qi-enabled wireless charging systems. To wirelessly charge your iPhone and Juice Pack case:

  1. Place the Juice Pack case (with your iPhone inside) onto a compatible Qi wireless charging pad or Charge Force accessory.
  2. Ensure the case is properly aligned with the charging surface. Magnetic Charge Force accessories will automatically align the case for optimal charging.
  3. Charging will begin automatically. The LED indicator lights on the case will flash to confirm charging is active.
Magnetic Wireless Docks showing various mophie charging accessories

Figure 3: The mophie Juice Pack case is compatible with various magnetic wireless charging docks and pads.

Pass-Through Charge and Sync

When connected to a computer via the Micro USB cable, the Juice Pack case enables pass-through charging and data synchronization. Your iPhone will charge first, followed by the Juice Pack case. Data transfer between your iPhone and computer will also occur as normal.

Product Video: mophie Juice Pack Air Overview

Video 1: Ovaj video pruža kratak pregledview of the mophie Juice Pack Air, demonstrating its features and functionality.

Održavanje

Čišćenje

To clean your mophie Juice Pack case, gently wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the case's finish or internal components.

Skladištenje

When storing the Juice Pack case for extended periods, ensure it is partially charged (around 50%) to maintain battery health. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Rješavanje problema

Case Not Charging iPhone

  • Ensure the iPhone is correctly seated in the case and the Lightning connector is fully engaged.
  • Verify the Juice Pack case itself has sufficient charge by checking the LED indicators.
  • Press and hold the power button for 2 seconds to activate charging.

Case Not Recharging

  • Check the Micro USB cable and power adapter for damage. Try a different cable or adapter if available.
  • Provjerite je li Micro USB kabel sigurno spojen i na kućište i na izvor napajanja.
  • If using wireless charging, ensure the case is properly aligned on a compatible Qi charging pad.

LED indikatori ne rade

  • Attempt to charge the case using the Micro USB cable. If the lights still do not illuminate, contact customer support.

Specifikacije

FeatureDetalj
Brandmophie
Kompatibilni modeli telefonaiPhone 7, iPhone 8, iPhone SE
BojaCrna
MaterijalPlastika, silikon
Nivo vodootpornostiNije vodootporan
Dodatne karakteristikeHeavy Duty Protection, Lightweight, Wireless Charging Compatible
Veličina ekrana4.7 inča
Dimenzije artikla2.81 x 0.66 x 4.14 inča
Broj modela3673_JPA-IP7-BLK
Težina artikla3.51 unce
UPC810472036731

Garancija i podrška

Informacije o garanciji

The mophie Juice Pack Wireless Charging Protective Power Pack Case comes with a 1 godine ograničene garancije. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official mophie website.

Korisnička podrška

For further assistance, technical support, or warranty claims, please visit the official mophie support website or contact their customer service department. You can often find FAQs, troubleshooting guides, and contact information on their website.

Posjetite mophie trgovina na Amazonu za više informacija o proizvodu.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.