BSIDE AVD03 Beskontaktni Voltage Uputstvo za upotrebu testera detektora

1. Uvod

The BSIDE AVD03 is a non-contact AC voltage detector designed for electrical professionals and DIY enthusiasts. It provides a safe and convenient way to detect the presence of AC voltage in cables, wires, circuit breakers, lighting fixtures, switches, and outlets without direct contact. This device features a wide voltage detection range from 12V to 1000V, offering both high (Hi) and low (Lo) sensitivity modes for various applications. Its pen-style design makes it portable and easy to use.

Slika 1: Bočna strana view of the BSIDE AVD03 Non-Contact Voltage Detector, showing the warning label and battery compartment area.

2. Sigurnosne informacije

Molimo pročitajte i razumite sva sigurnosna uputstva prije upotrebe ovog proizvoda. Nepoštivanje ovih uputstava može dovesti do strujnog udara, požara ili ozbiljnih povreda.

• Always assume live circuits: Do not rely solely on this device to determine if a circuit is de-energized. Always use proper lockout/tagout procedures and verify with a known live source before and after testing.
• Voltage Raspon: This device is designed to detect AC voltage between 12V and 1000V. Do not attempt to detect voltagizvan ovog raspona.
• izolacija: Ensure the device's casing is intact and free from damage before each use. Do not use if the insulation is compromised.
• Uslovi okoline: Use the device in dry conditions. Avoid use in rain or wet environments.
• Zamjena baterije: Replace batteries promptly when the low battery indicator appears. Do not operate with low batteries as accuracy may be affected.
• Lična zaštitna oprema: Uvijek nosite odgovarajuću ličnu zaštitnu opremu (LZO), kao što su izolirane rukavice i zaštitne naočale, prilikom rada s električnim kolima.
• Profesionalna upotreba: Ovaj uređaj je namijenjen za upotrebu od strane kvalifikovanog osoblja ili pod njihovim direktnim nadzorom.

3. Proizvod je gotovview

Familiarize yourself with the components of your BSIDE AVD03 voltage detektor.

Slika 2: Vrh view of the BSIDE AVD03, highlighting the "Hi" and "Lo" sensitivity buttons and the tip.

• Savjet za otkrivanje: The sensing area for detecting AC voltage.
• LED indikator: Illuminates and/or flashes to indicate voltage prisustvo.
• "Hi" Button: Activates high sensitivity mode (12V-1000V).
• "Lo" Button: Activates low sensitivity mode (48V-1000V).
• Dugme za napajanje: Turns the device ON/OFF. (Note: Based on images, "Hi" and "Lo" might also function as power/mode buttons. Assuming a combined function or a separate power button not clearly visible. Will clarify in setup.)
• Pretinac za baterije: Located at the rear, for AAA batteries.
• Džepna kopča: Za praktično nošenje.

Slika 3: Krupni plan view of the detection tip and the "Hi" and "Lo" sensitivity selection buttons.

4. Podešavanje

4.1 Instalacija baterije

The BSIDE AVD03 requires two AAA batteries (not included) for operation.

1. Pronađite poklopac odjeljka za bateriju na stražnjoj strani uređaja.
2. Slide the cover downwards or unclip it to open the compartment.
3. Umetnite dvije AAA baterije, pazeći na ispravan polaritet (+ i -) kao što je naznačeno unutar odjeljka.
4. Čvrsto zatvorite poklopac odeljka za baterije.

Figure 4: The BSIDE AVD03 with its battery compartment open, showing where to insert AAA batteries.

4.2 Uključivanje/isključivanje napajanja

• To turn ON: Press and hold the "Hi" or "Lo" button for approximately 2 seconds. The LED indicator will light up, and a beep may sound, indicating the device is ready.
• To turn OFF: Press and hold the "Hi" or "Lo" button for approximately 2 seconds. The LED indicator will turn off. The device also features an auto-power-off function after a period of inactivity to conserve battery life.

5. Uputstvo za upotrebu

5.1 Selecting Sensitivity Mode

The AVD03 offers two sensitivity modes:

• High Sensitivity Mode (12V-1000V): Press the "Hi" button. This mode is suitable for detecting lower voltages or for general detection where the exact location of the live wire is not precisely known.
• Low Sensitivity Mode (48V-1000V): Press the "Lo" button. This mode is ideal for detecting standard household voltages and reducing false positives in noisy electrical environments.

Switch between modes by pressing the respective "Hi" or "Lo" button while the device is on.

5.2 svtage Detekcija

1. Turn on the device and select the desired sensitivity mode.
2. Hold the detector by its body, ensuring your hand does not cover the detection tip.
3. Bring the detection tip close to the wire, outlet, or component you wish to test.
4. Ako je AC voltage is detected, the LED indicator will light up (and may flash), and the device will emit an audible beep. The frequency of beeps and flashes may increase as the detector gets closer to the voltage izvor.
5. Važno: Test the detector on a known live circuit before and after use to ensure it is functioning correctly.

Note: The detection distance and sensitivity can be affected by the type of insulation, wire thickness, and environmental factors.

6. Održavanje

• čišćenje: Obrišite uređaj suhom, čistom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Skladištenje: Uređaj čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• Održavanje baterije: Izvadite baterije ako uređaj nećete koristiti duži period kako biste spriječili curenje.
• inspekcija: Regularly inspect the device for any signs of damage, such as cracks in the casing or a loose detection tip. Do not use a damaged device.

7. Otkrivanje problema

8. Specifikacije

9. Garancija i podrška

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Keep your purchase receipt as proof of purchase.

Proizvođač: Kina