Kanto PMX700 Pro Series Full Motion Articulating TV Wall Mount User Manual

Uvod

The Kanto PMX700 Pro Series Full Motion Articulating TV Wall Mount is designed for 50" to 100" TVs, offering adjustable positioning, integrated cable management, and toolless tilt functionality. This manual provides comprehensive instructions for safe and effective installation, operation, and maintenance of your TV wall mount.

Sigurnosne informacije

• Read all instructions carefully before installation. Failure to do so may result in personal injury or property damage.
• Za optimalnu sigurnost i performanse preporučuje se profesionalna instalacija.
• Ensure the mounting surface can safely support the combined weight of the mount and your television.
• Nemojte prekoračiti maksimalnu težinu nosača.
• Always use the provided hardware and follow the specified drilling and tightening procedures.

Sadržaj paketa

• Kanto PMX700 TV Wall Mount
• Mounting Hardware (lag bolts, anchors, washers, spacers)
• Predložak za bušenje
• Integrated Cable Management Clips and Covers

Postavljanje i instalacija

The PMX700 mount features a segmented design for easier installation. The wall plate can be installed unassisted, and the arm assembly can then be hooked into place.

Korak 1: Pripremite TV

Attach the TV brackets to the back of your television. Ensure proper screw length and use spacers if necessary to avoid damaging internal components.

Pozadi view of a television with the Kanto PMX700 brackets attached, ready for mounting.

Step 2: Locate Wall Studs and Mark Drilling Points

Use a stud finder to locate the center of your wall studs. Use the provided drill template to mark the precise drilling locations.

The Kanto PMX700 mount's wall plate, highlighting the horizontal offset feature for flexible stud placement.

Korak 3: Instalirajte zidnu ploču

Drill pilot holes and secure the wall plate to the wall using the appropriate lag bolts and anchors for your wall type (wood studs or concrete).

The Kanto PMX700 mount in its fully retracted position, showing its low-profile design against the wall.

Step 4: Attach Arm Assembly

The arm assembly can be easily hooked into the wall plate and secured with the provided hardware. This segmented design simplifies the installation process.

Front view of the Kanto PMX700 TV wall mount, showcasing its robust construction and articulating arms.

Step 5: Mount the TV

Carefully lift the television and hook the TV brackets onto the arm assembly. Secure the TV using the safety screws.

A television mounted on the Kanto PMX700, extended from the wall, demonstrating its full motion capabilities.

Uputstvo za upotrebu

Podešavanje pozicije

The full-motion design allows you to extend, swivel, and tilt your TV to achieve the optimal viewing angle. The PMX700 extends up to 31.3 inches from the wall. The horizontal offset feature allows the arm assembly to be positioned independently of the wall plate, making it easier to center your television regardless of stud location.

Side view of the Kanto PMX700 TV wall mount fully extended, demonstrating its reach and articulation.

Toolless Tilt

The PMX series features a specially designed tilt mechanism that allows for precise adjustments without the need of tools. Set the tension to allow for fingertip adjustments, or lock it in place at the desired angle. The maximum tilt angle is 12 degrees.

Detaljno view of the toolless tilt mechanism on the Kanto PMX700 mount.

Cable Management

Utilize the integrated cable management clips and covers to route and conceal cables for a clean and organized appearance. This helps maintain a professional and tidy setup.

Close-up of the Kanto PMX700 mount's cable management system, showing cables neatly routed.

Održavanje

• Regularly check all screws and bolts to ensure they are securely tightened. Loose connections can compromise safety and stability.
• Očistite nosač mekom, suhom krpom. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače koji bi mogli oštetiti završnu obradu.
• Periodically lubricate moving parts with a silicone-based spray to maintain smooth articulation and tilt functionality.

Rješavanje problema

• If the TV is not level: Adjust the leveling screws on the TV brackets. The segmented design allows for easy post-installation leveling.
• If the mount feels loose: Re-tighten all wall plate and arm assembly bolts. Refer to the installation steps for proper torque.
• If movement is stiff: Apply a small amount of silicone-based lubricant to the articulating joints.
• If cables are pinched: Re-route cables through the integrated management system, ensuring they have enough slack for full motion.

Specifikacije

Garancija i podrška

The Kanto PMX700 TV Wall Mount comes with a Ten-year manufacturer's warranty, ensuring long-term reliability and peace of mind.

For technical support, warranty claims, or additional assistance, please visit the official Kanto website or contact Kanto customer service directly. Contact information can typically be found on the Kanto weblokacija ili ambalaža proizvoda.