Universal Office Chair Assembly Manual

1. Važne informacije o sigurnosti

Molimo vas da pažljivo pročitate sva uputstva prije sastavljanja i upotrebe. Sačuvajte ovaj priručnik za buduću upotrebu.

• Prije početka montaže provjerite jesu li svi dijelovi prisutni i neoštećeni. Ne koristite ako bilo koji dio nedostaje ili je oštećen.
• Sastavite stolicu na mekoj, čistoj površini kako biste spriječili ogrebotine.
• Ne zatežite vijke previše tokom montaže, jer to može oštetiti komponente.
• Držite djecu i kućne ljubimce dalje od područja montaže. Mali dijelovi mogu predstavljati opasnost od gušenja.
• Only use the chair for its intended purpose.
• Nemojte stajati na stolici.

2. Sadržaj paketa

Verify that all components listed below are included in your package.

3. Upute za sastavljanje

Follow these steps carefully to assemble your office chair.

1. Pričvrstite kotačiće na zvjezdastu bazu: Insert each caster (F) into the holes at the end of each leg of the star base (E). Push firmly until they click into place.
2. Umetnite plinski lift: Place the gas lift cylinder (D) into the center hole of the assembled star base (E). Ensure it sits securely.
3. Pričvrstite ploču mehanizma na sjedište: Align the mechanism plate (G) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the front of the mechanism plate faces the front of the seat. Secure with four M8x25mm screws (I) using the Allen wrench (J).
4. Pričvrstite naslone za ruke na sjedište: Attach the armrests (C) to the underside of the seat cushion (B) using four M6x20mm screws (H), two per armrest. Do not fully tighten yet.
5. Attach Chair Back to Armrests: Align the chair back (A) with the remaining holes on the armrests (C). Secure with the remaining four M6x20mm screws (H), two per armrest. Now, fully tighten all armrest screws.
6. Spojite sklop sjedišta na plinski lift: Carefully place the assembled seat and back onto the gas lift cylinder (D) protruding from the star base. Press down firmly to secure.

Your office chair is now assembled.

4. Uputstvo za upotrebu

Familiarize yourself with the chair's adjustment features for optimal comfort.

• Podešavanje visine: To raise the seat, lift the lever located under the right side of the seat while taking your weight off the chair. To lower the seat, lift the lever while seated. Release the lever at the desired height.
• Tilt Lock/Unlock: Pull the same lever outwards to unlock the tilt function, allowing the chair back to recline. Push the lever inwards to lock the chair back in an upright position.
• Napon nagiba: Rotate the round knob located under the front-center of the seat to adjust the tension of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Armrest Adjustment (if applicable): Some models feature adjustable armrests. Look for buttons or levers on the armrests to adjust their height or pivot.

5. Održavanje

Regular maintenance will prolong the life of your office chair.

• čišćenje: Obrišite površine mekom, damp cloth. For fabric upholstery, use a mild fabric cleaner. Avoid harsh chemicals or abrasive cleaners.
• Provjera pričvršćivača: Povremeno provjeravajte sve vijke i šrafove kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite.
• Caster Cleaning: Remove any hair or debris that may accumulate around the casters to ensure smooth movement.
• podmazivanje: The gas lift cylinder is maintenance-free. Do not attempt to lubricate it.

6. Otkrivanje problema

Pogledajte ovaj odjeljak za rješenja uobičajenih problema.

7. Specifikacije

Key technical details of your office chair.