Escali DHRW1

Escali DHRW1 Wireless BBQ Meat Fish Thermometer and Timer

Uputstvo za upotrebu

Uvod

The Escali DHRW1 Wireless Remote Food Thermometer and Timer is designed to assist in achieving precise cooking temperatures for various meats. This multifunction unit features an oven-safe probe, preset temperature alerts, and a built-in kitchen timer, allowing for monitoring food remotely.

Sadržaj paketa

Escali DHRW1 Wireless Thermometer main unit and probe

Image: The main display unit, wireless transmitter base, and stainless steel probe of the Escali DHRW1 thermometer.

Karakteristike

Escali DHRW1 Wireless Thermometer with feature callouts

Image: Diagram highlighting key features of the Escali DHRW1, including presets, range, cord, display, temps, timer, and probe.

Setup

  1. Umetnite baterije: Open the battery compartments on both the display unit and the wireless transmitter base. Insert the 4 AAA batteries, observing correct polarity.
  2. Spojite sondu: Plug the stainless steel probe into the jack on the wireless transmitter base.
  3. Uključeno: Turn on both the display unit and the transmitter base using their respective ON/OFF switches.
  4. Uparivanje: The units should automatically pair. If not, ensure they are within range and try turning them off and on again.
Nazad view of Escali DHRW1 display unit showing belt clip and kickstand

Slika: Stražnja strana view of the thermometer display unit, showing the battery compartment, belt clip, and kickstand.

Operacija

Korištenje termometra

  1. Select Meat Type: Pritisnite MESO button to cycle through preset meat types (Beef, Lamb, Veal, Hamburger, Pork, Turkey, Chicken, Fish).
  2. Select Doneness (Taste): After selecting the meat, press the TASTE button to choose the desired level of doneness (e.g., Rare, Medium, Well). The target temperature will adjust automatically.
  3. Set Custom Temperature: To set a custom target temperature, press the MODE button until "SET TEMP" is displayed. Use the MIN/+ i SEC/- dugmad za podešavanje temperature. Pritisnite MODE ponovo za potvrdu.
  4. Umetni sondu: Carefully insert the stainless steel probe into the thickest part of the food, avoiding bones.
  5. Temperatura monitora: The display unit will show the current internal temperature of the food and the target temperature. An alarm will sound when the target temperature is reached.
User wearing Escali DHRW1 remote display on belt clip while cooking

Image: A user wearing the Escali DHRW1 display unit on a belt clip, demonstrating its portability during cooking.

Korištenje tajmera

  1. Aktivirajte način rada tajmera: Pritisnite MODE dugme dok se ne prikaže "TIMER".
  2. Set Countdown Timer: Koristite MIN/+ i SEC/- buttons to set the desired countdown time (up to 99 minutes, 59 seconds). Press START/STOP za početak.
  3. Tajmer za odbrojavanje: To use as a count-up timer, ensure the timer is set to 00:00, then press START/STOP.
  4. Stop/Reset Timer: Pritisnite START/STOP to pause or resume the timer. Press CLEAR to reset the timer to 00:00.

Video: An official product video demonstrating the features and use of the Escali DHRW1 Wireless BBQ/Meat/Fish Thermometer.

Njega i održavanje

Rješavanje problema

ProblemRješenje
No display/Unit does not power on.Check battery polarity. Replace batteries if necessary. Ensure both units are switched ON.
Netačno očitavanje temperature.Ensure the probe is fully inserted into the thickest part of the food, away from bones. Verify the probe connection to the transmitter base.
No wireless connection.Ensure both the display unit and transmitter base are powered on and within the 200-foot range. Reduce obstructions between units.
Timer not functioning.Ensure the unit is in TIMER mode. Press START/STOP to activate. Press CLEAR to reset.

Specifikacije

Garancija i podrška

For warranty information or technical support, please refer to the official Escali webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte račun za kupovinu u slučaju reklamacije.