WAC Lighting QP-LED903-DB 900 Series LED Socket Set Instruction Manual

1. Uvod i pregled proizvodaview

This manual provides essential instructions for the safe and efficient use of the WAC Lighting QP-LED903-DB 900 Series LED Socket Set. This LED socket set is designed for indoor use and features energy-efficient LED technology.

Key features include a collar with a threaded set screw for adjusting lamp positions within a shade, smooth and continuous ELV dimming capabilities, and a long rated life. The system operates at 12 Volts and provides 450 lumens with a color temperature of 3000 Kelvin and a CRI of 82.

Slika 1: Gotovoview of the WAC Lighting QP-LED903-DB LED Socket Set.

2. Sigurnosne informacije

UPOZORENJE: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Always check local laws and regulations before installation and use.

• Always disconnect power at the circuit breaker before installation, removal, or servicing.
• Installation should be performed by a qualified electrician in accordance with all applicable electrical codes.
• Do not rest glass components directly on the socket base.
• Ensure the product is used only in dry, indoor locations.
• Do not modify the product in any way; unauthorized modifications may void the warranty and create safety hazards.
• Ovaj proizvod je UL certificiran, što ukazuje na usklađenost sa sigurnosnim standardima.

3. Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

• WAC Lighting QP-LED903-DB 900 Series LED Socket Set (1 unit)
• Uputstvo za upotrebu (1 jedinica)
• Collar with threaded set screw

Napomena: The package dimensions are approximately 5.62 inches (length) x 4.255 inches (width) x 2.765 inches (height).

4. Postavljanje i instalacija

This LED socket set is designed for protruding mounting and requires a 12 Volt corded electric power source with a US-style plug format (Type A).

1. Isključivanje struje: Before starting, ensure the power supply to the installation area is completely disconnected at the main circuit breaker.
2. Montaža: Securely mount the socket set using appropriate hardware for a protruding installation. Ensure the mounting surface is stable and can support the fixture's weight.
3. Ožičenje: Connect the 12 Volt corded electric power source to the socket set. Follow all local electrical codes and the wiring diagrams provided with your specific fixture (if applicable).
4. Lamp Podešavanje položaja: The included collar with a threaded set screw allows for varying lamp positions inside the shade. Adjust the collar to achieve the desired lamp depth and secure it by tightening the set screw.
5. Glass Placement: If your fixture includes glass components, ensure they are installed correctly and do not rest directly on the socket base.
6. Ponovno priključivanje napajanja: Nakon što je instalacija završena i svi priključci su sigurni, vratite napajanje na prekidaču.

Figure 2: Detail of the LED socket set, showing the collar for lamp position adjustment.

5. Uputstvo za upotrebu

The WAC Lighting QP-LED903-DB LED Socket Set is designed for straightforward operation.

• Uključivanje/isključivanje: Control the light using the wall switch connected to the fixture.
• Dimming: This socket set supports smooth and continuous ELV (Electronic Low Voltage) dimming. Use a compatible ELV dimmer switch for dimming functionality.
• Energetska efikasnost: The integrated LED technology ensures energy-efficient operation with no projected UV or IR radiation.

6. Održavanje

The WAC Lighting QP-LED903-DB LED Socket Set is designed for long-term, low-maintenance operation.

• čišćenje: To clean the socket set, ensure power is off. Use a soft, dry, or slightly damp cloth. Avoid abrasive cleaners, solvents, or any cleaning agents that could damage the finish or electrical components.
• Život LED dioda: The integrated LED has a rated life of 50,000 hours (estimated life of 30,000 hours), meaning no bulb replacement is typically required for the life of the product under normal operating conditions.
• inspekcija: Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, disconnect power immediately and consult a qualified electrician.

7. Otkrivanje problema

If you encounter issues with your LED socket set, refer to the following common troubleshooting steps:

• Svjetlo se ne pali:
  • Provjerite prekidač kako biste bili sigurni da uređaj ima napajanje.
  • Provjerite je li zidni prekidač u položaju "UKLJUČENO".
  • Osigurajte da su svi spojevi ožičenja sigurni.
• Problemi sa zatamnjivanjem:
  • Confirm that a compatible ELV dimmer switch is being used.
  • Check the dimmer switch wiring.
• Trepereće svjetlo:
  • Uvjerite se da su sve veze čvrste.
  • Provjerite je li napajanje stabilno.
  • If using a dimmer, ensure it is compatible and properly installed.

Ako problemi i dalje postoje nakon što ste pokušali izvršiti ove korake, obratite se korisničkoj podršci.

8. Specifikacije

9. Informacije o garanciji

The WAC Lighting QP-LED903-DB 900 Series LED Socket Set comes with a 5 godine garancije od datuma kupovine. Ova garancija pokriva nedostatke u materijalu i izradi pri normalnoj upotrebi. Molimo sačuvajte dokaz o kupovini za reklamacije.

For detailed warranty terms and conditions, please refer to the official WAC Lighting warranty policy or contact customer support.

10. Korisnička podrška

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact WAC Lighting customer support.

Proizvođač: WAC rasvjeta

Please visit the official WAC Lighting webstranicu za kontakt informacije i dodatne resurse.