Belimo FSLF24-S US Zaštita od požara i dima Damper Actuator Manual

1. Uvod

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Belimo FSLF24-S US Fire and Smoke Damper Actuator. This device is designed for the reliable control of fire and smoke dampers in ventilation and air conditioning systems, ensuring safety in critical building environments. Please read this manual thoroughly before proceeding with installation or operation.

2. Sigurnosne informacije

UPOZORENJE:

• Instalaciju i održavanje mora obavljati isključivo kvalificirano osoblje.
• Disconnect all power before installing or servicing the actuator to prevent electric shock.
• Osigurajte da sve instalacije budu u skladu s lokalnim i nacionalnim električnim propisima.
• Ne koristite aktuator preko njegove navedene zapremine.tage and environmental limits.
• This actuator is a safety device; ensure it is installed correctly and tested regularly.

3. Sadržaj paketa

Prilikom raspakivanja provjerite da li su svi artikli prisutni i neoštećeni:

• Belimo FSLF24-S US Zaštita od požara i dima Damper Actuator
• Mounting Bracket/Hardware (if applicable)
• Uputstvo za upotrebu (ovaj dokument)

4. Specifikacije

5. Postavljanje i instalacija

The Belimo FSLF24-S US actuator is designed for panel mounting and requires careful installation to ensure proper function and safety. Always refer to the specific wiring diagrams provided with the product packaging for detailed electrical connections.

5.1 Montiranje aktuatora

1. Ensure the mounting surface is clean, dry, and capable of supporting the actuator's weight.
2. Postavite aktuator na damper shaft according to the damper manufacturer's instructions.
3. Secure the actuator using appropriate mounting hardware, ensuring a firm and stable connection.
4. Provjerite da li je damper can move freely without obstruction after mounting.

5.2 Električne veze

The FSLF24-S US actuator operates on 24 Volts. Electrical connections should only be made by a licensed electrician in accordance with all applicable codes.

• Disconnect power to the circuit before making any connections.
• Connect the 24V power supply to the designated screw terminals on the actuator.
• Uvjerite se da su svi priključci sigurni i pravilno izolirani.
• Double-check wiring against the provided diagram to prevent damage to the actuator or system.

Slika 1: Front view of the Belimo FSLF24-S US Fire and Smoke Damper Actuator, showing its orange casing, control dial, and connection points. This image illustrates the general appearance and key features of the actuator for installation reference.

6. Uputstvo za upotrebu

The Belimo FSLF24-S US actuator is designed for automatic operation in conjunction with a fire alarm or building management system. It typically operates in a fail-safe mode, meaning it will drive the damper to a safe position (e.g., closed) upon loss of power.

6.1 Početno napajanje

1. After completing all electrical connections and mounting, restore power to the actuator.
2. Observe the actuator's initial movement. It should drive the damper to its default position (e.g., open or closed, depending on configuration).
3. Provjerite da li je damper moves smoothly and without obstruction.

6.2 Funkcionalno testiranje

Regular functional testing is crucial for fire and smoke dampers. Consult local fire safety regulations for required testing intervals.

• Initiate a test sequence from your building management system or fire alarm panel to activate the damper.
• Confirm that the actuator drives the damper to its intended fire/smoke safety position.
• Provjerite da li je damper returns to its normal operating position once the test signal is removed.

7. Održavanje

The Belimo FSLF24-S US actuator is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended.

• Godišnja inspekcija: Visually inspect the actuator and its connections for any signs of wear, damage, or corrosion.
• Funkcionalna provjera: Perform a functional test of the damper and actuator as per local regulations (e.g., NFPA 80, NFPA 105).
• čišćenje: Držite aktuator čistim od prašine i ostataka. Za čišćenje koristite meku, suhu krpu. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Nije potrebno podmazivanje: Pogon je fabrički podmazan i ne zahtijeva dodatno podmazivanje.

8. Otkrivanje problema

If the actuator is not functioning as expected, consult the following table before contacting technical support.

9. Garancija i podrška

Belimo products are manufactured to high standards and typically come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Belimo website.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Belimo customer support or your authorized Belimo distributor. When contacting support, please have your product model number (FSLF24-S US) and serial number (if applicable) readily available.

Belimo Official Webstranica: www.belimo.com