1. Uvod
This manual provides instructions for the proper installation and maintenance of your Auto Ventshade (AVS) Outside Mount Rain Guards, designed specifically for the 2011-2023 Dodge Charger. These vent visors are externally mounted and crafted from impact-resistant acrylic to enhance your driving experience by allowing fresh air circulation while protecting the interior from rain and other elements.
Please read all instructions carefully before beginning installation to ensure correct fitment and optimal performance.
2. Sadržaj proizvoda
Provjerite da li su sve komponente prisutne u vašem paketu:
- Front & Rear Outside Mount Ventvisors (4 pieces)
- 3M Automotive-Grade Adhesive Tape (pre-applied)
- Surface Prep Kit (alcohol wipes)
- Instalacijski list
Figure 1: Included components of the AVS Outside Mount Rain Guards.
3. Specifikacije
| Feature | Detalj |
|---|---|
| Brand | Auto Ventshade |
| Broj modela | 94313 |
| Fitment | 2011 - 2023 Dodge Charger |
| Boja | Smoke |
| Vanjski završetak | Glatko |
| Auto Part Position | Napolju |
| Broj komada | 4 |
| Vrsta instalacije | Samoljepljiva |
| Materijal | High-grade impact-resistant acrylic |
4. Sigurnosne informacije
Always exercise caution when working on your vehicle. Ensure the vehicle is parked on a level surface with the parking brake engaged. Wear appropriate personal protective equipment, such as gloves, during installation. Keep all tools and small parts away from children.
5. Upute za instalaciju
Installation is straightforward and requires no drilling. Follow these steps for a secure fit:
- Priprema:
- Ensure the ambient temperature is at least 68°F (20°C) for optimal adhesive bonding.
- Clean the surface area where the rain guards will be applied using the provided alcohol wipes. Ensure all dirt, wax, and residue are removed. The surface must be completely dry before proceeding.
- Testno prilagođavanje:
- Carefully test fit each vent visor to its corresponding window frame without removing the adhesive backing. This helps you visualize the correct placement and alignment.
- Identify the front and rear visors. The rear visors typically have a more rounded corner towards the rear of the vehicle, while the front visors have a more squared corner towards the front.
- Nanošenje ljepila:
- Peel back approximately 1-2 inches of the red adhesive liner from both ends of the vent visor. Fold the peeled liner outwards to create tabs for easy removal later.
- Carefully align the vent visor to the window frame, ensuring it sits just above the window frame and not on the paint.
- Once aligned, firmly press down on the exposed ends of the adhesive to secure them in place.
- Slowly pull the remaining red adhesive liner from underneath the vent visor while continuously applying firm pressure along the entire length of the visor. This ensures a strong bond.
- Konačno osiguranje:
- After the adhesive is fully applied, use a clean, soft cloth to firmly press along the entire length of the vent visor, applying consistent pressure to ensure maximum adhesion.
- Repeat the process for all four windows.
- Nakon instalacije:
- Avoid washing the vehicle for at least 24-48 hours to allow the adhesive to fully cure.
- For the first 72 hours, avoid rolling down the windows to allow the rubber weatherstripping to conform to the shape of the new vent visors.
Installation Video Guides:
Video 1: Installation of Original Ventvisor (Example: Toyota Tundra). This video demonstrates the general installation process for AVS Outside Mount Ventvisors.
Video 2: Installing Outside Mount Ventvisors (Example: Jeep Gladiator). Another example of the installation process for outside mount ventvisors.
Video 3: General Installation of Original Ventvisor. This video provides a general overview of the installation steps.
Figure 2: AVS Ventvisor being mounted externally with adhesive tape.
6. Uputstvo za upotrebu
Your AVS Outside Mount Rain Guards allow you to slightly crack your windows for fresh air circulation, even during rain or snow, without water entering the vehicle. This helps to reduce interior heat buildup and eliminate stale odors.
- To allow air circulation, gently lower your window a few inches. The rain guard will deflect rain and wind.
- Ensure windows are fully closed when parking for extended periods or in severe weather conditions.
Figure 3: AVS Rain Guards allow windows to be slightly open for ventilation.
7. Održavanje
To maintain the appearance and longevity of your AVS Outside Mount Rain Guards:
- Clean the rain guards regularly with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the acrylic finish.
- The material is UV resistant and car wash safe. However, avoid high-pressure washes directly on the edges of the rain guards, especially immediately after installation.
- Inspect the adhesive bond periodically to ensure it remains secure.
Figure 4: AVS Ventvisors are designed to be car wash safe.
8. Otkrivanje problema
If you encounter any issues with your AVS Outside Mount Rain Guards, consider the following:
- Window not rolling up smoothly: This can sometimes occur immediately after installation as the window's rubber seal adjusts. Gently assist the window by pulling up on the rain guard while rolling the window up. This should resolve itself after the 72-hour curing period.
- Ljepilo se ne lijepi: Ensure the surface was thoroughly cleaned and dry before application. Ambient temperature should be above 68°F (20°C). If issues persist, contact customer support.
9. Garancija
All AVS side window deflectors are backed by a Limited Lifetime Warranty. For specific details regarding warranty coverage and claims, please refer to the official Auto Ventshade webstranice ili kontaktirajte njihovu korisničku službu.
10. Podrška
For further assistance, technical support, or to inquire about replacement parts, please visit the official Auto Ventshade webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Kontakt informacije se obično mogu pronaći na pakovanju proizvoda ili na proizvođačevim website.