RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Proizvod je gotovview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Ključne karakteristike:

• Snaga: 39-watt LED
• Temperatura boje: 5100K Cool White
• Životni vijek: 100,000 hours based on LM-80 tests
• LED: Three multi-chip 13-watt high-performance LEDs
• Optika: NEMA type 7H x 6V with Air-flow technology heatsink
• Reflektor: Semi-specular anodized aluminum
• Brtve: Visokotemperaturni silikon
• završiti: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. Sigurnosne informacije

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• električna sigurnost: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
• uzemljenje: The fixture must be properly grounded to prevent potential electric shock.
• Montaža: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Radna temperatura: Ne koristite uređaj izvan njegovog navedenog temperaturnog raspona.
• LED: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Instalacija

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Potreban alat:

• Odvijač (Phillips i ravni)
• Skidači žice
• Kliješta
• Drill (if mounting surface requires pilot holes)
• Podesivi ključ

Opcije montaže:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Slika 2: Prample of a Slipfitter Mount (optional accessory)

Koraci instalacije:

1. Isključite napajanje: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage tester.
2. Pripremite montažnu površinu: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Žične veze:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Učvršćenje: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Podesite cilj: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Vrati snagu: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Operacija

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Standardna operacija:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Slika 3: Prample of a Photocell (optional accessory)

5. Održavanje

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

čišćenje:

• Eksterijer: Povremeno čistite vanjski dio uređaja mekom,amp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents.
• Objektiv: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

inspekcija:

• Povremeno provjeravajte uređaj na bilo kakve znakove oštećenja, labavih spojeva ili istrošenosti.
• Ensure all mounting hardware remains tight and secure.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Otkrivanje problema

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Specifikacije

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Garancija i podrška

Garancija proizvođača:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a 1-godišnja garancija proizvođača od datuma kupovine. Ova garancija pokriva nedostatke u materijalu i izradi pri normalnoj upotrebi i servisiranju.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Korisnička podrška:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webstranicu za trenutne kontakt podatke.