Thermaltake TR2 600W ATX 12 V2.3 Power Supply User Manual

1. Uvod

The Thermaltake TR2 600W ATX 12 V2.3 Power Supply is designed to provide stable and continuous power for computer systems. This power supply incorporates essential protections such as over-voltage, over-power, and short-circuit safeguards to ensure system safety. It features cable management optimized cables for improved thermal efficiency and a large 120mm fan with intelligent thermal control for quiet operation.

2. Sigurnosne informacije

UPOZORENJE: Hazardous voltages are contained within this power supply. This unit is not user-serviceable. Do not attempt to open the power supply casing. Return to a service center for repair if necessary.

• Prije instalacije ili održavanja provjerite je li napajanje isključeno iz glavne utičnice.
• Do not operate the power supply in high humidity or extreme temperature environments.
• Verify that your system's power requirements do not exceed the power supply's maximum output.
• Utilize proper grounding procedures during installation to prevent electrical hazards.

3. Sadržaj paketa

Prilikom otvaranja paketa, provjerite da li su prisutni svi sljedeći elementi:

• Thermaltake TR2 600W Power Supply Unit
• AC strujni kabl
• Montažni vijci
• Korisnički priručnik (ovaj dokument)

Figure 3.1: Thermaltake TR2 600W Power Supply and included accessories.

4. Postavljanje i instalacija

Follow these steps to properly install your Thermaltake TR2 600W Power Supply into your computer case.

4.1. Fizička instalacija

1. Provjerite je li računar isključen i iskopčan iz zidne utičnice.
2. Otvorite kućište računara da biste pristupili odjeljku za napajanje.
3. Carefully slide the Thermaltake TR2 600W Power Supply into the designated bay.
4. Align the screw holes on the power supply with those on the case.
5. Pričvrstite napajanje na kućište pomoću priloženih vijaka za montažu.

Figure 4.1: The Thermaltake TR2 600W Power Supply mounted in a PC case.

4.2. Upravljanje kablovima

The TR2 600W power supply features elongated cables designed for optimal routing, which helps improve airflow and overall thermal efficiency within your computer case. Route cables neatly to avoid obstructing airflow.

Slika 4.2: Gotovoview of the power supply cables.

4.3. Connecting to Motherboard and Peripherals

Connect the power supply cables to your motherboard and other components. Refer to your motherboard and component manuals for specific connector locations.

• Main ATX Power: Connect the 20+4 pin ATX connector to the corresponding port on your motherboard.
• CPU snaga: Connect the 4-pin or 8-pin (if applicable) CPU power connector to the motherboard.
• PCIe napajanje: For graphics cards requiring additional power, connect the 6-pin or 8-pin PCIe connectors.
• SATA napajanje: Connect SATA power cables to SSDs, HDDs, and optical drives.
• Molex Power: Connect Molex power cables to older peripherals or case fans if needed.

5. Uputstvo za upotrebu

After successful installation, ensure all connections are secure. Plug the AC power cord into the power supply and then into a wall outlet. Flip the power switch on the back of the power supply to the 'ON' position. You can then power on your computer system.

• Intelligent 120mm Cooling Fan: The integrated 120mm fan features intelligent thermal control, automatically adjusting its speed based on system load. This ensures efficient cooling during intensive tasks and maintains quiet operation during lighter activities.
• Power Protections: The power supply is equipped with over-voltage protection (OVP), over-power protection (OPP), and short-circuit protection (SCP) to safeguard your components from electrical anomalies.

6. Održavanje

Redovno održavanje pomaže u osiguravanju dugotrajnosti i optimalnih performansi vašeg napajanja.

• Uklanjanje prašine: Periodically clean the power supply's fan and vents to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air for best results.
• Protok zraka: Ensure that the computer case has adequate airflow and that the power supply's intake and exhaust vents are not blocked.
• Provjera kablova: Occasionally check all power connections to ensure they remain secure and free from damage.

Slika 6.1: Vrh view of the power supply, highlighting the 120mm cooling fan.

7. Otkrivanje problema

Ako naiđete na probleme s napajanjem, pogledajte sljedeće uobičajene korake za rješavanje problema:

• Nema napajanja:
  • Provjerite je li kabel za napajanje naizmjeničnom strujom sigurno spojen i na izvor napajanja i na zidnu utičnicu.
  • Verify that the power switch on the back of the power supply is in the 'ON' position.
  • Check all internal power connections (20+4 pin ATX, CPU, PCIe) to ensure they are firmly seated.
  • Testirajte zidnu utičnicu s drugim uređajem kako biste potvrdili da prima napajanje.
• Nestabilnost sistema/Nasumična isključenja:
  • Ensure your system's power draw does not exceed the power supply's capacity.
  • Check for proper ventilation and ensure the power supply fan is operating correctly.
  • Verify that all power connectors are properly seated.
• Glasna buka ventilatora:
  • Clean the fan and vents to remove any dust buildup.
  • Ensure the power supply is not under excessive load, which can cause the fan to spin faster.

If problems persist after following these steps, contact Thermaltake customer support for further assistance.

8. Specifikacije

Key technical specifications for the Thermaltake TR2 600W Power Supply:

Figure 8.1: Product label displaying electrical specifications and certifications.

9. Garancija i podrška

The Thermaltake TR2 600W Power Supply comes with a manufacturer-backed 5 godine garancije, ensuring peace of mind regarding its reliability and performance.

For technical support or warranty inquiries, please contact Thermaltake customer service:

• Hotline za podršku: 1-800-988-1088
• E-mail: support@thermaltakeusa.com
• Webstranica: www.thermaltakeusa.com/warranty