TP-Link Gigabit SFP to RJ45 Fiber Media Converter

1. Proizvod je gotovview

The TP-Link MC210CS is a Gigabit SFP to RJ45 Fiber Media Converter, engineered to facilitate the conversion between 1000BASE-LX/LH fiber optic media and 1000Base-T copper Ethernet media. This device is compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/LH standards, ensuring broad compatibility and reliable performance.

It is specifically designed for use with single-mode fiber optic cables, utilizing an SC-Type connector. The MC210CS operates at a wavelength of 1310nm for both transmitting and receiving data, supporting longwave (LX) laser specifications at full wire speed. This converter is capable of extending fiber optic distances up to 15 kilometers (9.3 miles).

2. Ključne karakteristike

• Complies with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/LH standards.
• Converts 1000BASE-LX/LH fiber to 1000Base-T copper media.
• Supports single-mode fiber optic cable with SC-Type connector.
• Extends fiber distance up to 15 kilometers (9.3 miles).
• Features Auto MDI/MDI-X for the TX port.
• Equipped with front panel status LEDs for easy monitoring.
• Can be used as a standalone device or with TP-Link's 19-inch system chassis.

3. Opis hardvera

The MC210CS features a compact design with clearly labeled ports and LED indicators for easy setup and monitoring.

Slika 3.1: Prednja ploča View
The front panel includes the Gigabit Ethernet (RJ45) port, two 1000BASE-LX fiber ports (TX and RX), and LED indicators for Power (PWR), Link/Act, and Gigabit Ethernet activity.

Figure 3.2: Fiber Port View
A closer look at the 1000BASE-LX fiber ports (TX for transmit, RX for receive) on the device, designed for single-mode fiber connections.

Slika 3.3: Bočna ploča View
The side panel features the power input port (9V/0.6A) for connecting the external power adapter.

4. Postavljanje i instalacija

Follow these steps to install your MC210CS Media Converter:

1. Uređaji za isključivanje: Ensure all devices to be connected (e.g., switches, routers, fiber optic equipment) are powered off before making connections.
2. Spojite optički kabel: Insert the single-mode fiber optic cable into the 1000BASE-LX SC-Type fiber ports (TX and RX) on the MC210CS. Ensure the cable is securely seated.
3. Spojite Ethernet kabel: Connect a standard RJ45 Ethernet cable from your network device (e.g., computer, switch, router) to the Gigabit Ethernet port on the MC210CS.
4. Povežite adapter za napajanje: Plug the provided power adapter into the 9V/0.6A power input port on the side of the MC210CS, then plug the adapter into a power outlet.
5. Uređaji za uključenje: Power on the connected network devices and then the MC210CS.
6. Verify LED Status: Check the LED indicators on the front panel to confirm proper operation.

5. Uputstvo za upotrebu

Once installed, the MC210CS operates automatically. Monitor the LED indicators for operational status:

• PWR (napajanje) LED:
  • na: Uređaj je uključen.
  • Isključeno: Uređaj je isključen.
• Link/Act (Fiber Link/Activity) LED:
  • na: Uspostavljena je važeća optička veza.
  • Treperi: Podaci se prenose ili primaju preko optičkog linka.
  • Isključeno: Nije otkrivena optička veza.
• Gigabit Ethernet (RJ45 Link/Activity) LED:
  • na: A valid Ethernet link is established at Gigabit speed.
  • Treperi: Podaci se prenose ili primaju preko Ethernet veze.
  • Isključeno: Nije detektovana Ethernet veza.

6. Otkrivanje problema

If you encounter issues with your MC210CS, refer to the following common problems and solutions:

• No Power (PWR LED is Off):
  • Provjerite je li adapter za napajanje sigurno priključen na uređaj i ispravnu utičnicu.
  • Provjerite da li je utičnica funkcionalna tako što ćete priključiti drugi uređaj.
• No Fiber Link (Fiber Link/Act LED is Off):
  • Check if the fiber optic cable is correctly and securely connected to both the MC210CS and the remote fiber device.
  • Ensure the fiber cable is not damaged or excessively bent.
  • Verify that the remote fiber device is powered on and functioning correctly.
  • Confirm that the fiber type (single-mode) and connector type (SC) match the requirements of the MC210CS.
• No Ethernet Link (Gigabit Ethernet LED is Off):
  • Ensure the RJ45 Ethernet cable is securely connected to both the MC210CS and your network device.
  • Verify that the network device (e.g., PC, switch) is powered on and its Ethernet port is active.
  • Pokušajte koristiti drugi Ethernet kabel kako biste isključili probleme s kabelom.
  • Confirm that the network device's Ethernet port supports Gigabit speeds.
• Data Transfer Issues (Link/Act LEDs On but no data):
  • Check network configurations on connected devices.
  • Ensure there are no IP address conflicts on the network.
  • Restart both the MC210CS and the connected network devices.

7. Tehničke specifikacije

8. Garancija i podrška

TP-Link proizvodi dolaze s ograničenom garancijom. Za detaljne informacije o garanciji, molimo pogledajte garantni list koji dolazi s vašim proizvodom ili posjetite službenu TP-Link web stranicu. website. Technical support and additional resources, including updated user guides and FAQs, are available through the TP-Link support portal.

For further assistance, you may refer to the official documentation provided by TP-Link:

• Uputstvo za instalaciju (PDF)
• Uputstvo za upotrebu (PDF)