Perel E305DIN1 DIN Rail Week Timer Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. Karakteristike

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

• Dnevni i sedmični program: Allows for flexible scheduling across days and weeks.
• 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
• LCD ekran: Clear display of time, day of the week, and current operating status.
• NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outages.
• 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
• Opcije montaže: Designed for DIN rail mounting or wall mounting using the included bracket.
• Prozirni zaštitni poklopac: Provides protection for the display and controls.

3. Postavljanje i instalacija

Upozorenje: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 Montaža

The E305DIN1 timer can be mounted in two ways:

• Montaža na DIN šinu: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
• Montaža na zid: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 Električni priključak

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
3. Prije ponovnog uključivanja napajanja, dvaput provjerite sve spojeve na čvrstoću i ispravnost.

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. Uputstvo za upotrebu

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 Podešavanje trenutnog vremena i dana

1. Pritisnite CLOCK dugme.
2. Dok drži CLOCK, pritisnite DAN dugme za postavljanje trenutnog dana u sedmici.
3. Dok drži CLOCK, pritisnite HOUR dugme za podešavanje trenutnog sata.
4. Dok drži CLOCK, pritisnite MIN dugme za podešavanje trenutne minute.

4.2 Programiranje vremena uključivanja/isključivanja

The timer allows for up to 8 ON/OFF program pairs.

1. Pritisnite PROG Pritisnite dugme jednom da biste ušli u režim programiranja. Na ekranu će se prikazati '1 ON'.
2. Koristite DAN, HOUR, i MIN buttons to set the desired ON time for program 1.
3. Pritisnite PROG ponovo. Na displeju će se prikazati '1 ISKLJUČENO'.
4. Koristite DAN, HOUR, i MIN buttons to set the desired OFF time for program 1.
5. Repeat steps 1-4 for programs 2 through 8.
6. Pritisnite CLOCK button to exit program mode and return to normal operation.

4.3 Funkcija ručnog premošćivanja

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

• Pritisnite MANUAL dugme za kretanje kroz režime:
• ON: The output is continuously ON, overriding any programmed OFF times.
• ISKLJUČENO: The output is continuously OFF, overriding any programmed ON times.
• AUTOMATSKI: Tajmer radi prema programiranim rasporedima UKLJUČIVANJA/ISKLJUČIVANJA.

5. Održavanje

The Perel E305DIN1 timer requires minimal maintenance.

• čišćenje: Obrišite vanjski dio mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Rezervna kopija baterije: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outages, the battery may need replacement by a qualified technician.
• Uslovi okoline: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. Otkrivanje problema

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

• Tajmer se ne uključuje/isključuje kako je programirano:
  • Provjerite je li tajmer uključen AUTO mode. If it's in ON or OFF manual override, it will ignore programs.
  • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
  • Ensure the current time and day are accurately set on the timer.
• Ekran je prazan ili treperi:
  • Provjerite glavno napajanje tajmera.
  • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
• Tajmer gubi postavke nakon nestanka strujetage:
  • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
• Time drift (timer becomes inaccurate over time):
  • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

Ako ovi koraci ne riješe problem, obratite se korisničkoj podršci.

7. Specifikacije

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

8. Garancija i podrška

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

Sačuvajte račun kao dokaz o kupovini u svrhu garancije.