Progress Lighting P8057-36 4-Inch Recessed Eyeball Pinhole Trim User Manual

Uvod

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P8057-36 4-Inch Recessed Eyeball Pinhole Trim. Please read this manual thoroughly before beginning installation and retain it for future reference.

The P8057-36 is an eyeball trim designed for use with Progress Lighting 4-inch recessed lighting housings. It features a 360-degree rotation and a 30-degree tilt capability, allowing for adjustable light direction.

Važna sigurnosna uputstva

UPOZORENJE: Opasnost od strujnog udara. Isključite napajanje na kutiji s osiguračima ili prekidaču prije instalacije ili servisiranja.

• Svi električni priključci moraju biti u skladu s lokalnim propisima, uredbama ili Nacionalnim električnim kodeksom (NEC).
• Posavjetujte se s kvalificiranim električarem ako niste sigurni u proces instalacije.
• Ensure the trim is compatible with your existing recessed housing. This trim is designed for 4-inch recessed housings.
• Nemojte prekoračiti maksimalnu snagutage specificirano za lamp. This trim is for use with 50-watt 12V MR-16 lamps.
• Handle the trim and lamp with care to avoid damage.

Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

• 1 x P8057-36 Recessed Eyeball Pinhole Trim (Chestnut finish)
• Uputstvo za instalaciju (ovaj dokument)

Note: Recessed housing and lamp (50-watt 12V MR-16) are sold separately.

Postavljanje i instalacija

This trim is designed for easy installation into compatible 4-inch recessed lighting housings. Ensure power is OFF before proceeding.

1. Pripremite kućište: Ensure the recessed housing is properly installed and wired according to local electrical codes. The housing should be a 4-inch model compatible with 12V MR-16 lamps.
2. Instalirajte Lamp: Carefully insert a 50-watt 12V MR-16 lamp u lamp holder within the recessed housing. Ensure it is seated securely. (Lamp nije uključeno)
3. Insert the Trim: Align the P8057-36 eyeball trim with the opening of the recessed housing. Gently push the trim upwards until the retention clips (if present on your housing) engage and hold the trim firmly in place.
4. Secure the Trim: Ensure the trim is flush with the ceiling surface. Adjust as necessary.
5. Vrati snagu: Once the trim is securely installed, restore power at the circuit breaker.

Image: The P8057-36 Recessed Eyeball Pinhole Trim in Chestnut finish. This image shows the front view of the trim, highlighting its adjustable eyeball design.

Operacija

The P8057-36 trim allows for directional lighting adjustment.

• Podešavanje smjera svjetla: Gently grasp the outer ring of the eyeball and rotate it 360 degrees to direct light horizontally.
• Tilting the Eyeball: The eyeball can be tilted up to 30 degrees to aim light vertically. Carefully push or pull the eyeball to achieve the desired angle.

Note: Avoid excessive force when adjusting the eyeball to prevent damage to the mechanism.

Održavanje

• čišćenje: Disconnect power before cleaning. Wipe the trim with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Lamp Zamjena: Disconnect power before replacing the lamp. Dozvolite lamp to cool completely. Carefully remove the old MR-16 lamp and insert a new 50-watt 12V MR-16 lamp. Ensure the new lamp is securely seated before restoring power.

Rješavanje problema

Specifikacije

Garancija i podrška

Garancija proizvođača: This Progress Lighting product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or further assistance, please contact Progress Lighting customer service. Refer to the official Progress Lighting webstranicu za najnovije kontakt informacije.

Možete posjetiti Progress Lighting Store na Amazonu za više informacija o njihovim proizvodima.