1. Važna sigurnosna uputstva
Please read these instructions carefully before installation and use. Failure to follow these instructions may result in property damage, personal injury, or death.
- This appliance must be installed by a qualified electrician and plumber in accordance with all local and national regulations.
- Ensure the electrical supply matches the specifications of the appliance (230 V, 3.5 kW).
- Do not operate the appliance if it is damaged or not functioning correctly.
- Ne blokirajte odvod vode iliamper sa ventilom za smanjenje pritiska.
- This unit is designed for pressureless operation. Only use the special mixer tap supplied with the unit.
- Držite djecu podalje od uređaja tokom rada.
- Isključite napajanje prije obavljanja bilo kakvog održavanja ili čišćenja.
2. Proizvod je gotovview
The CLAGE M3/SMB is a compact, hydraulically controlled small instantaneous water heater designed for over-sink installation. It provides hot water instantly for a single tap, making it ideal for hand washing or small dishwashing tasks. The unit features an effective bare-wire heating system (IES®) and comes with a special mixer tap for wall connection.
This image displays the CLAGE M3/SMB small instantaneous water heater unit mounted above a chrome-finished mixer tap. The water heater unit is a compact, rectangular, silver-colored device designed for over-sink installation. The mixer tap features two control knobs and a curved spout.
3. Tehničke specifikacije
| Specifikacija | Vrijednost |
|---|---|
| Broj modela | M3/SMB |
| Izlazna snaga | 3.5 kW |
| Nominal Voltage | 230 V |
| Električna veza | 1 AC/N/PE, Plug-ready |
| Dimenzije (V x Š x D) | 135 x 186 x 87 mm |
| Težina | Pribl. 1.92 kg |
| Zaštitna klasa | IP 25 |
| Priključci za vodu | 3/8 inča |
| Radni pritisak | Pressureless |
| Vrsta montaže | Wall-mounted, Over-sink |
4. Instalacija (Podešavanje)
Instalaciju mora izvršiti kvalifikovani stručnjak.
4.1 Raspakivanje
- Pažljivo izvadite sve komponente iz pakovanja.
- Check for any visible damage. Do not install if damaged.
- Ensure all parts listed in the packing contents are present.
4.2 Montaža jedinice
- Select a suitable wall location directly above the sink, ensuring sufficient space for maintenance and operation.
- Use the variable metal wall bracket to mark drilling points.
- Izbušite rupe i umetnite odgovarajuće zidne tiple.
- Securely fasten the wall bracket to the wall.
- Mount the water heater unit onto the bracket.
4.3 Priključak za vodu
- Connect the cold water supply to the designated inlet on the mixer tap (usually marked blue).
- Connect the hot water outlet from the unit to the designated inlet on the mixer tap (usually marked red).
- Ensure all connections are tight to prevent leaks. Use appropriate sealing materials.
- Open the main water supply and check for leaks.
- Before electrical connection, flush the unit by opening the tap until water flows freely and air is expelled.
4.4 Električni priključak
- Provjerite je li glavni dovod struje isključen na prekidaču.
- Connect the appliance to a dedicated 230 V, 3.5 kW electrical circuit. The unit is plug-ready.
- Verify proper grounding.
- Once connections are secure, switch on the main power supply.
5. Operacija
5.1 Prva upotreba
- After installation and electrical connection, ensure the unit is completely filled with water by opening the cold water tap until water flows steadily.
- Turn the hot water knob on the mixer tap. The heating element will activate, and hot water will begin to flow after a short delay.
- Adjust the water temperature by mixing hot and cold water using the mixer tap controls.
5.2 Svakodnevna upotreba
- To obtain hot water, turn the hot water knob on the mixer tap. The unit will heat water as it flows through.
- To obtain cold water, turn the cold water knob.
- Adjust the flow rate and temperature as desired using the tap controls.
- The unit is designed for continuous flow within its specified capacity.
6. Održavanje
Regular maintenance ensures optimal performance and longevity of your CLAGE M3/SMB water heater.
- Čišćenje eksterijera: Očistite spoljašnjost jedinice mekom, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
- Uklanjanje kamenca: Depending on water hardness, limescale can build up in the heating system. If you notice a decrease in hot water flow or temperature, the unit may need descaling. This procedure should be performed by a qualified technician.
- Provjera veza: Periodically inspect water and electrical connections for any signs of leaks or wear.
- Mixer Tap Maintenance: Clean the aerator of the mixer tap regularly to remove any debris or limescale buildup that might restrict water flow.
7. Otkrivanje problema
Prije nego što kontaktirate korisničku podršku, molimo pogledajte sljedeći vodič za rješavanje problema:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema tople vode | Nema napajanja Protok vode je prenizak Greška grejnog elementa | Check circuit breaker and power connection Increase water flow at the tap Kontaktirajte kvalifikovanog tehničara |
| Nizak protok tople vode | Začepljen aerator Nakupljanje kamenca Nedovoljan pritisak vode | Očistite aerator Descale unit (professional service) Check main water supply pressure |
| Curenje vode iz uređaja ili priključaka | Labave veze Oštećene brtve Unutrašnja greška | Tighten connections (do not overtighten) Replace seals (professional service) Kontaktirajte kvalifikovanog tehničara |
| Voda nije dovoljno topla | Protok vode previsok Nakupljanje kamenca | Smanjite protok vode na slavini Descale unit (professional service) |
If the problem persists after attempting these solutions, please contact a qualified technician or CLAGE customer support.
8. Garancija i podrška
For warranty information, technical support, or spare parts, please refer to the official CLAGE website or contact your local CLAGE dealer. Keep your purchase receipt as proof of purchase.
