King Electric ESP230-R 7-Day Programmable Electronic Thermostat User Manual

1. Uvod

Welcome to the instruction manual for your King Electric ESP230-R 7-Day Programmable Electronic Thermostat. This device is engineered to provide precise temperature control and optimize energy consumption for your 208/240-Volt heating system. Its advanced features include 7-day programming capabilities, a large backlit LCD display for clear visibility, and discreetly located programming buttons to prevent unintended adjustments.

2. Sigurnosne informacije

UPOZORENJE: Opasnost od strujnog udara. Always disconnect power to the heating system at the main circuit breaker before installing, cleaning, or servicing this thermostat. Failure to do so can result in serious injury or death.

• Instalaciju treba izvršiti kvalificirani električar u skladu sa svim lokalnim i nacionalnim električnim propisima.
• Nemojte prekoračiti navedeni volumentage (208/240V) or amperage (22 Amp) ratings of this thermostat.
• Uvjerite se da su svi spojevi ožičenja sigurni i pravilno izolirani.
• This thermostat is designed for use with electric resistance heating systems only.

3. Sadržaj paketa

• King Electric ESP230-R Thermostat
• Montažni vijci
• Uputstvo za upotrebu

4. Instalacija

Potreban alat: Phillips screwdriver, voltage tester.

1. Isključite napajanje: Turn off power to the heating system at the main circuit breaker before beginning installation.
2. Uklonite stari termostat: Carefully remove your existing thermostat from the wall. Note the wiring connections.
3. Ožičenje: This thermostat requires a 3-wire installation. Connect the line voltage wires and the load wires to the appropriate terminals on the ESP230-R thermostat. Refer to the wiring diagram provided with the physical product for specific connections. Ensure all connections are tight.
4. Montaža: Secure the ESP230-R thermostat to the wall electrical box using the provided mounting screws. Ensure it is level and flush with the wall.
5. Vrati snagu: Nakon što je instalacija završena i svi priključci su sigurni, vratite napajanje na glavnom prekidaču.

Napomena: The thermostat's internal sensor can be affected by drafts from the wall box or direct heat sources. Ensure the wall box is sealed to prevent cold air infiltration, and avoid installing the thermostat near windows, doors, or heat-emitting appliances.

5. Podešavanje

Upon initial power-up, the thermostat will display default settings. You will need to configure the time, day, and desired temperature unit.

Slika 1: Prednja strana view of the King Electric ESP230-R thermostat, showing the digital display with time, set temperature, and room temperature, along with the up/down adjustment buttons.

5.1 Podešavanje vremena i dana

Lift the front cover of the thermostat to access the programming buttons. Use the designated buttons (refer to the physical product's button labels) to set the current time (hour, minute, AM/PM) and the current day of the week. Confirm each setting as per the on-screen prompts.

5.2 Changing Temperature Unit (Fahrenheit/Celsius)

The thermostat defaults to Fahrenheit (°F). To switch to Celsius (°C):

1. Isključite napajanje: Turn off power to the thermostat at the circuit breaker.
2. Access Jumper: Carefully remove the thermostat from its wall mount to access the internal components. Locate the small jumper pin on the circuit board.
3. Remove Jumper: Gently remove the jumper.
4. Re-mount and Restore Power: Re-mount the thermostat and restore power at the circuit breaker.
5. Resetiraj jedinicu: After restoring power, it is necessary to perform a unit reset (e.g., power cycle) for the change to Celsius to take effect. Consult the physical product's detailed instructions for the exact reset procedure.

6. Uputstvo za upotrebu

6.1 Adjusting Set Temperature

Use the visible Up (▲) and Down (▼) buttons on the front of the thermostat to manually adjust the desired set temperature. A temporary override will be active until the next programmed schedule change.

6.2 Raspored programa

The ESP230-R allows for 7-day programmable scheduling, enabling you to set different temperatures for various times of the day and days of the week. This feature helps in optimizing comfort and energy savings.

1. Programiranje pristupa: Lift the front cover to reveal the programming buttons.
2. Select Day/Period: Use the appropriate buttons to navigate through the days of the week and the programmable periods (e.g., Wake, Leave, Return, Sleep).
3. Postavljena temperatura: For each period, use the Up/Down buttons to set the desired temperature.
4. Sačuvaj postavke: Slijedite upute na ekranu da biste spremili programirani raspored.

Savjet: Setting back the temperature during unoccupied hours or while sleeping can lead to significant heating cost savings (up to 15%).

6.3 Prikaz informacija

The large LCD continuously displays:

• Current Time and Day
• Set Temperature (TEMP SET)
• Current Room Temperature (ROOM TEMP)
• Heat Indicator (illuminates when heating system is active)

7. Održavanje

The King Electric ESP230-R thermostat requires minimal maintenance.

• čišćenje: Periodically wipe the exterior of the thermostat with a soft, slightly damp krpom. Ne koristite abrazivna sredstva za čišćenje, rastvarače ili hemijske sprejeve, jer oni mogu oštetiti završnu obradu ili unutrašnje komponente.
• Prozirni otvori: Provjerite da li su mali otvori na termostatu casing are free from dust and debris. Blocked vents can impair the accuracy of the internal temperature sensor.

8. Otkrivanje problema

9. Specifikacije

10. Garancija i podrška

10.1 Informacije o garanciji

This King Electric ESP230-R thermostat is covered by a 1 godine ograničene garancije on all product components from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, unauthorized alteration, or acts of nature. Any attempt to repair or modify the unit by unauthorized personnel will void the warranty.

10.2 Korisnička podrška

For technical assistance, troubleshooting guidance, or to inquire about warranty claims, please contact King Electric customer service. Refer to the product packaging or the official King Electric website for the most current contact information, including phone numbers and support email addresses.

When contacting support, please have your product model number (ESP230-R) and date of purchase readily available.